@article { author = {Madhoushi, Mehrab and Chavoshi, Arash}, title = {Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {3}, number = {1}, pages = {52-66}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, effects of using nanoclay on withdrawal strength of screw and nail and also water absorption of nanoclay-MDF dust-PP composite were investigated. Hence, sanding dust of MDF used as lignocellulose material and polypropylene as the thermoplastic material. Also, nanoclay of Cloisite® 15A was used in three different weights 2%, 4% and 6%. At first, raw materials were produced using extruder to fabricate granules. Then, 36 boards (12 treatments in 3 replicates) with nominal density of 1 gr/cm3 and dimensions of 30 cm by 20 cm by 1 cm were produced using hot molding method. Afterwards, samples were conditioned at room temperature conditions for 3 weeks. Then, withdrawal strengths of nails and screws were measured according to BS Standard (CEN/TS15534–1:2007). Also, water absorption and thickness swelling of samples were determined. Results showed that the withdrawal strengths of nails and screws decreases as MDF dust weight is increased. Maximum withdrawal strengths of nails and screws were obtained with 2% of nanoclay. Furthermore, increasing percentage of dust weight as well as nanoclay particles water absorption and thickness swelling of samples are reduced.}, keywords = {Nanoclay,MDF dust,Withdrawal strength of screw and nail,water absorption}, title_fa = {بررسی توان نگهداری پیچ و میخ و میزان جذب آب چندسازه نانو رُس-نرمه MDF-پلی‎پروپیلن}, abstract_fa = {در این پژوهش تاثیر استفاده از ذرات نانو رُس بر توان نگهداری انفصالی اتصال‌های پیچ و میخ و میزان جذب آب چندسازه نانو رُس-نرمهMDF -پلی‎پروپیلن مورد بررسی قرار گرفت. بدین منظور از نرمه سنباده زنیMDF  به عنوان ماده لیگنوسلولزی و پلی‎پروپیلن به عنوان ماده ترموپلاستیک استفاده شد. همچنین نانو رُس Cloisite® 15A در سه سطح وزنی 2%، 4% و 6% مورد استفاده قرار گرفت. در آغاز مواد اولیه با استفاده از مخلوط‎کن به صورت دانه ای (گرانول) تهیه شدند. سپس 36 تخته (12 تیمار در 3 تکرار) با چگالی اسمی gr/cm31 در ابعادcm 1×cm20×cm30 با استفاده از روش پرس گرم تهیه شده است. در ادامه آزمونه‎های آزمونی (36 تخته ساخته شده) برای تعادل رطوبتی به مدت 3 هفته در محیط قرار گرفته‎اند. سپس به منظور بررسی ویژگی های مکانیکی از استاندارد (CEN/TS15534–1:2007) استفاده شده است. نتایج نشان دادند که با افزایش درصد وزنی نرمه سنباده زنی MDF توان نگهداری انفصالی اتصالات پیچ و میخ (عمود بر سطح) آزمونه‎های آزمونی کاهش پیدا کردند. بیشترین میزان مقاومت به اتصالات پیچ و میخ در سطح 2 درصد وزنی ذرات نانو رُس به‎دست آمد. همچنین نتایج جذب آب و واکشیدگی ضخامت نمونه‎های آزمونی نشان داد که با افزایش درصد وزنی نرمه‌های MDF این مقادیر افزایش پیدا کردند در حالی که افزایش درصد وزنی ذرات نانو رُس با سطوح ثابت نرمه MDF، موجب کاهش مقادیر جذب آب و واکشیدگی ضخامت شد.  }, keywords_fa = {نانو رُس,نرمه MDF,توان نگهداری انفصالی اتصالات پیچ و میخ,جذب آب}, url = {https://www.ijwp.ir/article_11465.html}, eprint = {https://www.ijwp.ir/article_11465_7b0a0dccffb5b810d6916a17cdc0b33b.pdf} }