@article { author = {D.Hosseini, Kazem and Elyasi, Abdollah}, title = {Study on the possibility of using bagasse in manufacture of sound-proof particleboard}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {3}, number = {1}, pages = {43-52}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Acoustic properties of composite boards made out of bagasse were studied in this research. Urea-formaldehyde (UF) and melamine-urea-formaldehyde (MUF) adhesives were used to produce homogeneous as well as three-layered insulating boards with three densities of 0.3, 0.4, and 0.5 g/cm3. The sound absorption coefficient of experimental was measured at five frequencies of 250, 500, 1000, 2000, and 4000 Hz. Results have indicated that the sound absorption coefficient increases as the frequency is increased up to 2000 Hz; further increase in the frequency resulted in decrease in the coefficient. Two type of resins UF and MUF didn't show significant difference in sound absorption. Boards with lower density absorbed less at lower frequencies; however, increase in the density of the boards resulted in the increase in their sound absorption. Furthermore, layered boards resulted in more sound absorption coefficients at lowest frequency of 250 Hz. Higher frequencies, though, have shown more absorption coefficient. It can be concluded that composite boards made of bagasse can be recommended for production of insulating or sound-proof boards}, keywords = {Bagasse,Acoustic boards,Sound absorption coefficient,Layered board,Homogeneous board}, title_fa = {بررسی امکان استفاده از باگاس در ساخت تخته خرده چوب عایق صوت}, abstract_fa = {در این پژوهش امکان ساخت تخته خرده چوب عایق صوت از باگاس مورد بررسی قرار گرفته است. چگالی (دانسیته) تخته‌ها (gr/cm3 3/0، 4/0، 5/0)، نوع رزین مصرفی (MUF ,UF) و نوع ساختار تخته‌ها (همسان و لایه‌ای)، به عنوان عامل های متغیر این پژوهش در نظر گرفته شدند. پس از ساخت نمونه‌های آزمونی در شرایط آزمایشگاهی، برابر استانداردDIN68763  ضریب جذب صوت تخته‌ها در پنج فرکانس 250، 500، 1000، 2000 و 4000 هرتز اندازه گیری شد. نتایج این بررسی نشان داد که با افزایش فرکانس، ضریب جذب تخته‌های مورد بررسی تا فرکانس 2000 هرتز افزایش می‌یابد ولی در فرکانس 4000 هرتز دچار افت می‌شود. نوع چسب تأثیر معنی داری بر ویژگی های صوتی تخته های مورد بررسی ندارد. تخته های سبک‌تر در فرکانس‌های پائین، میزان ضریب جذب کمتری دارند اما در فرکانس‌های بالاتر با کاهش چگالی تخته ها شاهد افزایش ضریب جذب صوت می باشیم. همچنین تخته‌هایی که ساختار لایه‌ای دارند در فرکانس 250 هرتز ضریب جذب صوت بیشتری دارند اما در فرکانس‌های بالاتر تخته‌های همسان ضریب جذب بیشتری را نشان می‌دهند. جمع‌بندی نتایج به دست آمده از این تحقیق نشان می دهد که باگاس می‌تواند ماده‌ی اولیه مناسبی برای ساخت تخته‌ خرده چوب عایق صوت باشد.}, keywords_fa = {باگاس,تخته خرده چوب عایق صوت,ضریب جذب صوت,تخته خرده چوب لایه‌ای,تخته خرده چوب همسان}, url = {https://www.ijwp.ir/article_11464.html}, eprint = {https://www.ijwp.ir/article_11464_c7199c68179329cc92eae30eb4663fd4.pdf} }