@article { author = {Ghahri, Saman and K.Najafi, Saeid and Mohebbi, Behbood}, title = {Effect of Impact Modifier Type on Water Absorption and Thickness Swelling Parameters of Wood Flour- Recycled Polypropylene Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {2}, number = {2}, pages = {115-24}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the effect of impact modifier type on water diffusion coefficient, maximum water absorption and thickness swelling parameters of wood flour- recycled polypropylene composites were evaluated. For this purpose, a virgin PP was thermo-mechanically degraded by two times extrusion under controlled conditions in a twin-screw extruder at a rotor speed of 100 rpm and a temperature of 1900C. The virgin and recycled PP in 2nd stage, compatibilizer (0, 2 % w/w) and wood flour were compounded at 50% weight sawdust loading in a counter-rotating twin-screw extruder in presence different type of impact modifiers (0, 6 % w/w). Ethylene vinyl acetate (EVA), ethylene-propylene-diene monomer (EPDM) and acrylonitrile-butadiene-styrene (ABS) were used as impact modifiers. The analysis of diffusion mechanism and thickness swelling rate were done based on Fick’s theory and swelling model for wood flour- recycled polypropylene composites. The composites containing two times recycled PP exhibited lower moisture diffusion coefficients, swelling rate parameter, maximum water absorption, thickness swelling. Also results showed that moisture diffusion coefficients and thickness swelling parameters of composites containing EVA are lower than composites containing EPDM and ABS. The use of compatibilizer decreased the moisture diffusion coefficients and thickness swelling parameters of the wood flour- recycled polypropylene composites  }, keywords = {Moisture diffusion coefficients,Thickness swelling parameter,Impact modifier,Compatibilizer,Wood flour- recycled polypropylene composites}, title_fa = {بررسی و ارزیابی اثرگذاری های نوع اصلاح کننده ضربه بر مشخصه های جذب آب و واکشیدگی ضخامت چندسازه آرد چوب- پلی‌پروپیلن بازیافتی}, abstract_fa = {در این پژوهش اثرگذاری های نوع اصلاح کننده ضربه بر ضریب انتشار رطوبت، بیشینه جذب آب و مشخصه (پارامتر) واکشیدگی ضخامت چندسازه آرد چوب- پلی‌پروپیلن بازیافتی مورد ارزیابی قرار گرفت. با این هدف، دو مرحله بازیافت کنترل شده پلی‌پروپیلن (به طور مصنوعی) با دستگاه تزریق (اکسترودر) دو پیچی ناهمسو گرد در شرایط کنترل شده با شتاب 100دور در دقیقه و دمای 190 درجه سلسیوس انجام پذیرفت. پلی‌پروپیلن (دست اول و بازیافتی)، سازگار کننده مالئیک انیدرید پلی‌پروپیلن (صفر و 2 درصد) و آرد چوب با نسبت 50 درصد وزنی در حضور سه نوع اصلاح کننده ضربه اتیلن وینیل استات (EVA), اتیلن پروپیلن دی‌ان منومر (EPDM) و اکریلونیتریل بوتا دی‌ان استایرن (ABS) هریک به مقدار 6 درصد وزنی با دستگاه اکسترودر دو پیچی با یکدیگر مخلوط شدند. بررسی سازوکار انتشار رطوبت و میزان واکشیدگی ضخامت چندسازه آرد چوب- پلی‌پروپیلن بازیافتی با نظریه انتشار فیک و مشخصه واکشیدگی ضخامت انجام شد. نتایج نشان دادند که دوبار بازیافت پلی‌پروپیلن سبب کاهش ضریب انتشار رطوبت، بیشینه جذب آب و مشخصه واکشیدگی ضخامت و میزان واکشیدگی ضخامت چندسازه آرد چوب- پلی‌پروپیلن بازیافتی شد. همچنین اصلاح کننده ضربه EVA نسبت به دو نوع اصلاح کننده ضربه دیگر عملکرد بهتری در کاهش ضریب انتشار رطوبت و مشخصه واکشیدگی ضخامت نشان داد. همچنین استفاده از سازگار کننده در همه نمونه‌ها سبب بهبود مشخصه های جذب آب و واکشیدگی ضخامت شد.}, keywords_fa = {ضریب انتشار رطوبت,مشخصه واکشیدگی ضخامت,اصلاح کننده ضربه,سازگار کننده,چندسازه آرد چوب- پلی‌پروپیلن بازیافتی}, url = {https://www.ijwp.ir/article_11449.html}, eprint = {https://www.ijwp.ir/article_11449_a88e3e0518929c94ead70baa59a80d16.pdf} }