@article { author = {Pourabbasi, Sara and Kord, Behrouz}, title = {Investigation on the Effect of Chemical Foaming agent and Wood Flour content on Mechanical Properties, Density and Cell morphology of HDPE/EVA/ Wood Flour Hybrid Foamed Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {2}, number = {1}, pages = {63-80}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the effects of chemical foaming agent and wood flour content on cell morphology, density and mechanical properties of HDPE/EVA/ Wood Flour hybrid foamed composites were investigated. For this aim, composites were prepared via melt mixing in an internal mixer, then foamed using single-stage batch foaming method. Then mechanical properties such as flexural strength, flexural and tensile modulus and density were measured. Morphology of the samples was also evaluated by scanning electron microscopy (SEM). The results of this study have indicated that the flexural strength, flexural and tensile modulus and density increases with the increase of wood flour content. However, with addition of chemical foaming agent content and EVA content, mechanical properties and density of foamed composites decreased. Moreover, wood fiber acted as nucleating agents that substantially reduced cell size and increased cell density. In addition, EVA plays an important role in foaming process by increasing the melt viscosity of the polymer matrix, in a way that samples with higher content of EVA have the highest cell density and the lowest cell size.}, keywords = {Chemical Foaming Agent,Morphology,EVA,Batch foaming Method,Hybrid Foamed Composites}, title_fa = {بررسی اثر میزان ماده کف زای شیمیایی و آرد چوب بر ویژگیهای مکانیکی، چگالی و ریخت شناسی چندسازه سبک شده هیبریدی پلی اتیلن سنگین/ اتیلن وینیل استات/آرد چوب}, abstract_fa = {در این تحقیق تأثیر میزان ماده کف‌زای شیمیایی و آرد چوب  بر ویژگیهای مکانیکی، چگالی و ریخت شناسی چندسازه سبک شده هیبریدی پلی اتیلن سنگین/ اتیلن وینیل استات/ آرد چوب مورد بررسی قرار گرفت. برای این منظور، چندسازه‌ها با استفاده از فرآیند اختلاط در یک مخلوط کن داخلی تهیه و سپس به روش تک مرحله‌ای (Batch) فوم شدند. سپس خواص مکانیکی شامل مقاومت خمشی، مدول خمشی و کششی و چگالی اندازه‌گیری شدند. ریخت شناسی نمونه‌ها نیز با عکسبرداری با میکروسکوپ الکترونی(SEM) مورد ارزیابی قرار گرفت. نتایج نشان داد با افزایش میزان آرد چوب، مقاومت خمشی، مدول خمشی و کششی و چگالی افزایش یافت. در حالی‌که با افزایش میزان ماده کف زای شیمیایی و EVA، خواص مکانیکی و چگالی چندسازه‌های فوم شده کاهش یافت. همچنین آرد چوب به عنوان عامل هسته‌گذار عمل کرده و منجر به کاهش اندازه سلولی و افزایش چگالی سلولی گشت. از طرفی، EVA  با افزایش گرانروی مذاب ماتریس پلیمری، نقش مهمی را در فرآیند فوم شدن ایفاء نمود. به گونه‌ای که نمونه‌های دارای میزان EVA بیشتر، دارای بیشترین میزان چگالی سلولی و کمترین اندازه سلولی گشتند.  }, keywords_fa = {ماده کف‌زای شیمیایی,ریخت شناسی,EVA,فوم کردن به روش (Batch),چندسازه سبک شده هیبریدی}, url = {https://www.ijwp.ir/article_11443.html}, eprint = {https://www.ijwp.ir/article_11443_cc80b0ba1afdacbb2d611c10f6410efb.pdf} }