@article { author = {Ghofrani, Mohammad and Manavi, Gholamhossein and Mirshokrai, Ahmad}, title = {Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {5}, number = {1}, pages = {33-44}, year = {2014}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In This research, the scratch strength (Cross-Cut Test) of clear paints (nitrocellulose lacquers and acid catalyst lacquers) of wood species Beech, Elm, Alder and spruce were studied as a function of moisture content (MC) of the samples. For this purpose, lumbers (550×110×12 mm) were cut from sapwood in tangential surfaces and were air dried for one month according to wood drying procedures. Then, for pre-conditioning of moisture content, at the levels of 8%, 12% and 15%, the samples were placed in three clima rooms. Then, finish applied and strength tests were performed. The results revealed that for acid catalyst lacquers the highest scratch strength (10.4%) belongs to Elm wood with 8% moisture content, and the lowest scratch strength (53.6%) belongs to Spruce wood with nitrocellulose lacquers having 15% moisture content.}, keywords = {: Scratch strength,Clear paints,Wood species,Nitrocellulose lacquers,Acid catalyst lacquers}, title_fa = {بررسی مقاومت به چسبندگی رنگ‌های شفاف رایج در صنایع مبلمان بر روی گونه‌های چوبی راش، ملج، توسکا و نوئل}, abstract_fa = {در این تحقیق، مقاومت به چسبندگی (آزمون خراش- نوارچسب Cross-Cut) رنگ‌های شفاف سیلر- کیلر و سیلر- نیم پلی‌استر، و با توجه به درصدرطوبت، در گونه‌های چوبی‌راش (Fagus orientalis)، ملج (Ulmus smontana)، توسکا (Alnus glutinosa) و نوئل (Picea  glauca) مورد مطالعه قرارگرفت. تخته‌هایی به ابعاد 12×110×550 میلی‌متر از قسمت برون چوب و از تخته مماسی تهیه شدند و به مدت یک ماه با رعایت اصول روش‌های چوب خشک کنی در هوای آزاد قرار گرفتند. سپس برای متعادل‌سازی رطوبت، به طور مجزا برای رسیدن به رطوبت 8، 12 و 15% در سه اتاق کلیما قرار داده شدند. تمامی سطوح نمونه‌ها با استفاده از پیستوله رنگ‌کاری شدند و آزمون‌های‌ مقاومت به خراش بر روی آن‌ها انجام شد. نتایج نشان داد که بیشترین مقدار مقاومت به خراش، با درصد از دست دادن چسبندگی 4/10%، مربوط به رنگ سیلر- نیم پلی‌استر استفاده شده بر روی گونه‌ی چوبی ملج با رطوبت 8% و کمترین مقدار مقاومت به خراش با درصد از دست دادن چسبندگی 6/53%، مربوط به رنگ سیلر- کیلر استفاده شده بر روی گونه‌ی چوبی نوئل با رطوبت 15% بوده‌است. }, keywords_fa = {مقاومت به چسبندگی,رنگ‌های شفاف,گونه‌ی چوب,سیلر,کیلر,نیم‌پلی-استر}, url = {https://www.ijwp.ir/article_11260.html}, eprint = {https://www.ijwp.ir/article_11260_96bcb34c9c76bccf0dccd15de700f4b3.pdf} }