@article { author = {Yadollahi, Rahim and Dehghani firouzabadi, Mohammadreza}, title = {Investigation on anatomical, chemical and pulping characteristics of Silybum marianum stem}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {4}, number = {2}, pages = {59-68}, year = {2013}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {To study the possibility of using plant Silybum marianum in paper industry, its stem yield potential, chemical properties, fiber indices and pulping was evaluated. Mean value of fiber length and diameter of Silybum marianumstem harvested in early June, were calculated 178 and 3.5 cm, respectively. Dry weight of whole stem determined 4710 kg per hectar. Mean value of fiber length, diameter, cavity diameter and wall thickness were obtained 1194, 16.06, 9.06, and 3.66 μm, respectively. Raunkel, flexibility, and slenderness ratios of its fibers were determined 80.83, 56.39, and 74.37, respectively. Results of chemical analysis showed that the stem comprises %70.35 holocellulose, %39.25 cellulose, %13.13 lignin, %3.09 acetone-soluble, %18 hot water-soluble extractives, and %11/85 ash. Soda pulp was obtained at 165 °C pulping time, 25% alkaline and 10:1 ratio of liquor to chips. Results of pulping showed that with increasing of pulping time from 30 to 210 minutes, the kappa number and yield decreased from 77.32 to 32.13 and 43.6 to 36.5, respectively; whereas accepted pulp yield (passed from 20 mesh) increased from 17.4 to 35.5% paper made of pulp with kappa number 32 had 36.82 Nm/g tensile index, 3.76 km breaking length and 1.75 Kpa.m2/g burst strength. In general, achieved results have shown that the present studied species could be regarded more for papermaking because of the suitable fiber biometrical and chemical properties as compared to other non-woody plants.}, keywords = {Silybum marianum,Yield potential,Chemical characteristics,tensile index,Breaking length,burst strength}, title_fa = {بررسی ویژگی‌های ساختاری، شیمیایی و خمیردهی ساقه گیاه مارتیغال (Silybum marianum)}, abstract_fa = {به‌منظور بررسی امکان استفاده از ساقه گیاه مارتیغال یا خارمریم (Silybum marianum)در صنعت کاغذسازی، قابلیت عملکرد، ترکیبات شیمیایی، زیست سنجی (بیومتری) الیاف و خمیردهی ساقه این گیاه مورد ارزیابی قرار گرفت. میانگین طول و قطر ساقه گیاه خودروی مارتیغال استحصال شده در اوایل خرداد ماه به ترتیب 178 و 5/3 سانتی متر محاسبه شد. وزن خشک کل ساقه این گیاه در مجموع 4710 کیلوگرم در هکتار برآورد شد. میانگین طول، قطر، قطر حفره و ضخامت دیواره الیاف آن نیز به ترتیب 1190، 06/16، 06/9 و  µm66/3 به دست آمد. ضرایب مقاومت به پارگی (رانکل)، انعطاف‌پذیری، درهم رفتگی الیاف این گیاه به ترتیب 83/80، 39/56 و 37/74 تعیین شد. نتایج تجزیه شیمیایی نشان داد که ساقه این گیاه دارای 35/70% هولوسلولز، 25/39% سلولز، 13/13% لیگنین، 09/3% مواد استخراجی محلول در استون، 18% مواد قابل حل در آب داغ و 85/11% خاکستر می‌باشد. در دمای پخت 165 درجه سلسیوس، قلیائیت 25٪ و نسبت مایع پخت به ماده اولیه 10 به 1، خمیر سودا تهیه شد. نتایج خمیرسازی نشان داد که با افزایش زمان پخت از 30 تا 210 دقیقه، عدد کاپای خمیر از 32/77 به 13/32 و بازده پخت از 6/43 به 5/36 درصد کاهش می‌یابد، اما بازده خمیر مورد قبول (عبور کرده از غربال با مش 20) از 4/17 به 5/35 درصد افزایش می‌یابد. کاغذ ساخته شده از خمیر با عدد کاپای32 دارای شاخص کششی Nm/g82/36 و طول پارگی km 76/3 و شاخص ترکیدن kpa.m2/g 75/1 می‌باشد.}, keywords_fa = {: مارتیغال,قابلیت عملکرد,ویژگی‌های شیمیایی,شاخص کشش,طول پارگی,مقاومت به ترکیدن}, url = {https://www.ijwp.ir/article_11190.html}, eprint = {https://www.ijwp.ir/article_11190_d6bbfa05450c67268f66c29a0939d588.pdf} }