@article { author = {Azar, Haghighi and Karimi, Ali Naghi and Taghiyari, Hamid Reza and Hamzeh, Yahya and Enayati, Ali.akbar}, title = {Study on the potential use of nano-wollastonite to improve the fire resistance and dimensional stability of poplar wood (Populus nigra)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {4}, number = {2}, pages = {1-10}, year = {2013}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study possibility of nano-wollastonite uses for improving fire retardency of poplar wood (Populus nigra) was investigated. Also, water absorption and volumetric swelling of specimens were measured. Specimens for fire resistance were prepared according to ISO 11925 standard and for physical properties ASTM D4446-2002 standard. Specimens were impregnated with nano-wollastonite (NW), using full-cell process. Rate of concentrations were, 4, 6.3, 10 and 12 percent. Five fire-retarding properties were measured including: weight loss (%), ignition point (s), duration of flame after removing the burner (s), duration of glow after removing the burner (s), and carbonized area (%). The results showed that fire-retarding properties were increased with the NW-content. Furthermore, the treated wood specimens showed higher dimensional stability.}, keywords = {Bethel method,Poplar wood,Fire-Retarding Properties,Impregnation,Nano-wollastonite,Volume swelling,water absorption}, title_fa = {بررسی امکان کاربرد نانو‌ولاستونیت برای افزایش مقاومت به آتش و ثبات ابعاد چوب صنوبر (Populus nigra)}, abstract_fa = {چکیده در این مطالعه امکان کاربرد نانوذرات ‌ولاستــونیت، برای بهبود ویژگی‌های مقاومت به آتش چوب صنـــوبر (Populus nigra)مورد ارزیابی قرار گرفت. همچنین میزان جذب آب و واکشیدگی حجمی نمونه‌ها نیز اندازه‎گیری شد. نمونه‏های آزمونی برابر استانــــدارد 11925ISO  مربــوط به اندازه‌گیری خواص مقاومــت به آتش و استانــدارد 2002- 4446- ASTM D مربوط به اندازه‌گیری خواص فیزیکی تهیه شدند. اشباع نمونه‏های چوبی با نانوولاستونیت با استفاده از روش بتل در چهار سطح غلظت 4، 3/6، 10 و 12 درصد انجام شد. ویژگی مقاومت به آتش نمونه‌های مورد بررسی توسط پنج معیار (درصد کاهش وزن، زمان‌های نقطه اشتعال، دوام شعله، دوام گدازش، و درصد سطح کربونیزه‌شده) مورد ارزیابی قرار گرفت. نتایج نشان داد که با افزایش غلظت نانوولاستونیت مقاومت به آتش نمونه‏های تیمارشده افزایش یافت. همچنین، چوب تیمارشده با این ماده ثبات ابعاد بیشتری نیز نشان داد.}, keywords_fa = {روش بتل,چوب صنوبر,ویژگی‌های کندسوزکنندگی,نانوولاستونیت,ثبات ابعاد,جذب آب}, url = {https://www.ijwp.ir/article_11183.html}, eprint = {https://www.ijwp.ir/article_11183_192c504e3da662baac2fc483b70de3ae.pdf} }