@article { author = {ahmadi, mohammad and moezzipour, bita and moezzipour, aida and Rostampour haftkhani, akbar and sharari, mearaj}, title = {Utilization of recycled fibers from MDF wastes and waste paper for manufacturing fiberboard and the effect of poly vinyl acetate on its practical properties}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {173-183}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, the utilization of fibers recycled from MDF wastes and waste papers for manufacturing fiberboards was investigated. The proportion of waste paper to recycled fibers from MDF wastes was 70/30 and 50/50. Also the effect of utilization of poly vinyl acetate adhesive on properties of boards was investigated. Boards were manufactured at density of 0.3 g/cm3 and dimension of 30×30×1.2cm. Practical properties of boards including thickness swelling, bending strength, modulus of elasticity and internal bonding were measured. The results showed that the utilization of adhesive can improve all of board properties. Change in proportion of recycled fibers to waste paper had different influences on various properties of manufactured fiberboards. The proportion of 70/30 of waste paper to recycled fibers from MDF wastes led to improving bending strength and modulus of elasticity of fiberboards, while the manufactured boards from proportion of 50/50 had better results about thickness swelling and internal bonding. Overall, it can be concluded that recycled fibers from MDF wastes mixed with waste paper can successfully utilize in producing fiberboards.}, keywords = {Recycling of MDF wastes,Waste paper,Mechanical properties,physical properties,Poly Vinyl Acetate}, title_fa = {بررسی امکان ساخت تخته فیبر از الیاف بازیافت شده از ضایعات MDF و کاغذ باطله و تأثیر مصرف چسب پلی وینیل استات بر ویژگی های کاربردی آن}, abstract_fa = {در این تحقیق امکان استفاده از الیاف بازیافت شده از ضایعات MDF و کاغذ باطله در ساخت تخته فیبر بررسی شد. نسبت ترکیب کاغذ باطله به الیاف بازیافت شده از ضایعات MDF به ترتیب در دو سطح 70 به30 و 50 به50 در نظر گرفته شد. هم‌چنین تأثیر مصرف چسب پلی وینیل استات بر خصوصیات تخته‌ها مورد بررسی قرار گرفت. تخته‌ها با دانسیته gr/cm3 3/0 و ابعاد cm 2/1×30× 30 ساخته شدند. ویژگی‌های کاربردی تخته‌ها شامل واکشیدگی ضخامت، مقاومت خمشی، مدول الاستیسیته و چسبندگی داخلی اندازه‌گیری شدند. نتایج نشان دادند که در صورت مصرف چسب، کلیه ویژگی‌های تخته‌ها بهبود می‌یابد. تغییر نسبت الیاف بازیافتی به کاغذ باطله، اثرات متفاوتی روی ویژگی‌های تخته‌ها داشت. در شرایطی که از نسبت 70 به 30 کاغذ باطله به الیاف بازیافت شده از ضایعات MDF استفاده شد. مقاومت خمشی و مدول الاستیسیته تخته ها بهبود یافت. اما در مورد واکشیدگی ضخامت و چسبندگی داخلی، تخته های ساخته شده از نسبت 50 به 50 کاغذ باطله به الیاف بازیافت شده از ضایعات MDF وضعیت بهتری داشتند. در کل می‌توان نتیجه گرفت که الیاف بازیافت شده از ضایعات MDF در ترکیب با کاغذ باطله می‌توانند برای ساخت تخته فیبر مورد استفاده قرار گیرند.}, keywords_fa = {بازیافت ضایعات MDF,کاغذ باطله,ویژگی‌های مکانیکی,ویژگی‌های فیزیکی,پلی‌وینیل‌استات}, url = {https://www.ijwp.ir/article_36857.html}, eprint = {https://www.ijwp.ir/article_36857_9cb2c6905564a6726c13f24496b24bbf.pdf} } @article { author = {قربانی, مریم and nikkhah, َAzadeh and toopa, afsaneh}, title = {Effect of densification on the practical properties of chemical and thermal modified poplar wood}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {185-197}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {For investigation on the effect of densification on the physical and mechanical properties of the chemically and thermally modified poplar wood (Populus deltoides), thermal modification at 170°C, chemical modification with glutaraldehyde, and compression at three levels of 10, 25, and 40% at the hot pressing time of 2h were carried out. With increasing compression ratio from 25 to 40%, the density of thermally and chemically modified samples increased by 13% and 8%, respectively. Spring back and moisture absorption of the thermally modified/compressed samples was more than chemically modified/compressed ones. Water absorption and thickness swelling for 10% compression ratio were more than the chemical and thermal control samples but significantly decreased with increasing compression ratio. The mechanical properties of both thermally and chemically modified samples were improved with increasing compression ratio. From 25 to 40% compression, improvement of bending modulus for both modified samples were more than 10 to 25%, which was more significant for the thermally modified samples. Bending strength was also improved with increasing compression ratio, but the intensity of improvement decreased by 40% compression. Increasing of compression ratio also led to a significant improvement of the compression strength parallel to grain and hardness, which was more obvious for glutaraldehyde modified specimens than the thermally modified ones.}, keywords = {Densification,Glutaraldehyde,Thermal modification,physical properties,Mechanical properties}, title_fa = {اثر فشرده‌سازی بر خواص کاربردی چوب صنوبر اصلاح‌شده به روش‌های شیمیایی و گرمایی}, abstract_fa = {در بررسی اثر فشرده­سازی بر خواص فیزیکی و مکانیکی گونه صنوبر دلتوئیدس (Populus deltoides) اصلاح شیمیایی و گرمایی شده، اصلاح گرمایی در دمای 170 درجه سانتی‌گراد، اصلاح شیمیایی با گلوتارآلدئید و فشرده­سازی در 3 سطح 10، 25 و 40 درصد در زمان پرس 2 ساعت انجام شد. دانسیته­ چوب اصلاح گرمایی و شیمیایی شده با افزایش فشردگی از 25 به 40 درصد، به ترتیب 13 و 8 درصد افزایش یافت. بازگشت فنری و جذب رطوبت در اصلاح تلفیقی گرمایی/فشرده­سازی بیشتر از شیمیایی/فشرده­سازی بود. جذب آب و واکشیدگی ضخامت در فشرده­سازی 10 درصد بیشتر از شاهد اصلاح شیمیایی و گرمایی بود، ولیکن با افزایش فشردگی، کاهش معنی­دار یافت. خواص مکانیکی در هر دو اصلاح گرمایی و شیمیایی با افزایش نسبت فشردگی بهبود یافت. بهبود مدول خمشی با افزایش فشردگی در هر دو اصلاح، از فشردگی 25 به 40 درصد، بیش از 10 به 25 درصد بود که در نمونه­های اصلاح گرمایی شده محسوس­تر بود. مقاومت نیز با افزایش فشردگی بهبود یافت، ولیکن نسبت این بهبود در فشردگی 40 درصد کاهش یافت. افزایش فشردگی به بهبود معنی­دار فشار موازی الیاف و سختی نیز انجامید که در نمونه­های اصلاح‌شده با گلوتارآلدئید در مقایسه با گرمایی محسوس­تر بوده است.}, keywords_fa = {فشرده‌سازی,گلوتارآلدئید,اصلاح گرمایی,خواص فیزیکی,خواص مکانیکی}, url = {https://www.ijwp.ir/article_36890.html}, eprint = {https://www.ijwp.ir/article_36890_e4134de1e65686ea74aeaa73794c137b.pdf} } @article { author = {Abedini, Raoufeh}, title = {Effect of different oil heat treatment conditions on chemical structure and physical properties of wingnut (Pterocarya fraxinifolia) wood}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {199-209}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Wood is one of the most important natural resources and its preservation is unavoidable for increasing the service life of wooden products. Wood modification with hot oil causes a steady transfer of heat into the wood and reduce its hydrophilicity through a chemical change of wood macromolecules. This study investigated the effect of oil heat treatment with linseed oil on the chemical structure and physical properties of wingnut wood. Specimens were heated at 140, 170, and 200 Cº for 2 and 4 hours. Results showed that water absorption of modified samples were lower than the control ones, and subsequently water absorption and thickness swelling of the modified samples decreased with increasing temperature. However, the time of modification had no significant effect. Also, Fourier-transform infrared (FTIR) analysis confirmed the reduction of hydroxyl groups in the modified samples, which this reduction was more sensible with increasing the temperature of modification.  }, keywords = {Oil heat modification,Linseed oil,wingnut wood,water repellent efficiency,chemical structure}, title_fa = {اثر شرایط مختلف اصلاح روغن‌گرمایی بر ساختار شیمیایی و خواص فیزیکی چوب گونه‌ لرگ(Pterocarya fraxinifolia)}, abstract_fa = {چوب یکی از منابع بسیار مهم طبیعی بوده­ و حفاظت از آن برای افزایش طول عمر محصولات ساخته‌شده، امری اجتناب­ناپذیر است. اصلاح با روغن­های داغ سبب می­شود که گرما به­صورت یکنواخت به داخل چوب منتقل شود و با ایجاد تغییر شیمیایی در ماکرومولکول­های چوب، آب‌دوستی آن را کم کند. در این پژوهش اثر اصلاح روغن گرمایی در حضور روغن بزرک بر خواص فیزیکی و ساختار شیمیایی چوب گونه­ی لرگ بررسی گردید. برای این منظور نمونه­های چوبی در محیط روغن بزرک، تحت دمای 170،140 و200 درجه سانتی‌گراد در دو بازه زمانی 2 و 4 ساعت گرمادهی شدند. بر اساس نتایج، جذب آب نمونه­های اصلاح­شده کمتر از شاهد بود و مقدار جذب آب و واکشیدگی ضخامت با افزایش دمای تیمار کاهش یافت اما زمان اصلاح گرمایی تأثیر معنی­داری نداشت. همچنین طیف­سنجی مادون‌قرمز مؤید کاهش گروه­های هیدروکسیل چوب، در نمونه­های اصلاح روغن گرمایی شده می­باشد که با افزایش دمای اصلاح، این کاهش محسوس­تر گردید.}, keywords_fa = {اصلاح روغن گرمایی,روغن بزرک,چوب لرگ,کارایی آب‌گریزی,ساختار شیمیایی}, url = {https://www.ijwp.ir/article_36960.html}, eprint = {https://www.ijwp.ir/article_36960_b9e9962315ab54eb071171e9449c50b1.pdf} } @article { author = {Rezayati Charani, Pejman and Moradian, Mohammad Hadi and Kherad, Mahmoud and Aryaie Monfared, Mohammad Hadi}, title = {Use of titanium dioxide nanoparticles and aqueous methylene blue on ECF bleaching of bagasse pulp}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {211-224}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This research was carried out with the aim of bleaching of soda-bagasse pulp, produced in the Pars paper industry, with oxygen (O), chlorine dioxide (D), and hydrogen peroxide (P) in the presence of titanium dioxide nanoparticle (T) as photo catalyzer and methylene blue (M) as an alternative to sodium hypochlorite (H). Bleaching of pulp was performed in sequences of O, OD, OD (Ep) T1, OD (Ep) T2, OD (EP) T1m and OD (Ep) T2m. The physical and mechanical properties of pulp and handsheets were measured as well as COD of effluents. According to the results, the kappa number of the pulp was reduced in two treatments of OD (EP) T1m, and OD (Ep) T2m and was the same as the control sample, bleached with HH conventional sequence in the Pars paper industry. However, the degree of polymerization of the two recent treatments was twice more than that of the control sample. The results of degree of brightness showed that the OD (Ep) T1, OD (Ep) T2, OD (EP) T1m, and OD (Ep) T2m sequences can result in the same degree as the bleached control sample of the Pars paper industry (75% ISO). Also, results showed that by replacing the HH sequence with OD (Ep) T1m and OD (Ep) T2m sequences with the same kappa number, an improvement in bleached pulp yield (3%), viscosity (207%), degree of polymerization (213%) of pulp, opacity (5%), tensile strength index (2.7%) and tear index (49%) of the paper can be expected, while the COD of effluent would decrease by 30%. In general, the use of titanium dioxide nanoparticles and aqueous methylene blue in OD (Ep) bleaching sequence can result in the higher pulp brightness and strength properties of paper.}, keywords = {Bagasse,Bleaching,Titanium Dioxide nanoparticle,Methylene blue,Degree of polymerization}, title_fa = {استفاده از نانو ذرات دی‌اکسید تیتانیم و متیلن آبی در رنگ‌بری بدون کلر عنصری (ECF) خمیرکاغذ باگاس}, abstract_fa = {این تحقیق باهدف رنگ‌بریECF خمیرکاغذ سودای باگاس تولیدشده در صنایع کاغذ پارس با اکسیژن (O)، دی‌اکسید کلر (D) و پراکسید هیدروژن (P) در حضور فتوکاتالیزور نانوذره دی­اکسید تیتانیم (T) و متیلن آبی (M) به­عنوان جایگزینی برای هیپوکلریت سدیم (H) انجام شد. رنگ‌بری خمیرکاغذها طی توالی­هایHH، O، OD، OD(Ep)T1، OD(Ep)T2، OD(Ep)T1m و OD(Ep)T2mانجام شد. خواص فیزیکی و مکانیکی خمیرکاغذها و کاغذهای دست­ساز و COD پساب­ها مورد ارزیابی قرار گرفت. بر اساس این نتایج، عدد کاپا خمیرکاغذها طی دو توالی OD(Ep)T1m و OD(Ep)T2m معادل نمونه شاهد رنگ‌بری شده با توالی HH از صنایع کاغذ پارس بود؛ اما درجه بسپارش خمیرکاغذ بعد از دو توالی اخیر دو برابر نمونه شاهد بود. نتایج درجه روشنی کاغذهای حاصل نشان داد که با استفاده از توالی­های OD(Ep)T1، OD(Ep)T2 OD(Ep)T1m و OD(Ep)T2m می­توان به درجه روشنی مشابه نمونه شاهد صنایع کاغذ پارس (75 درصد ایزو) دست‌یافت. همچنین ارزیابی نتایج نشان داد که در صورت جایگزینی توالی HH با توالی OD(Ep)T1m و OD(Ep)T2m با عدد کاپای برابر می­توان انتظار بهبود بازده (3 درصد)، گرانروی (207 درصد)، درجه بسپارش (213 درصد) خمیرکاغذ و ماتی (5 درصد)، شاخص­های مقاومت به کشش (7/2 درصد) و پارگی (49 درصد) کاغذ را داشت ضمن این­که COD پساب نیز 30 درصد کاهش خواهد یافت. به‌طورکلی، استفاده از نانوذره دی‌اکسید تیتانیم و متیلن آبی امکان دستیابی به خمیرکاغذ با درجه روشنی بیشتر و خواص مقاومتی مناسب­تر را فراهم نمود.}, keywords_fa = {باگاس,رنگ‌بری,نانوذره دی‌اکسید تیتانیم,متیلن آبی,درجه بسپارش}, url = {https://www.ijwp.ir/article_37032.html}, eprint = {https://www.ijwp.ir/article_37032_83bbfe672b6165b008aa4c3d7280c753.pdf} } @article { author = {azizi, majid and Hasani Khorshidi, Fatemeh and Faezi Pour, Mohammad Mahdi and Zarea Hosseinabadi, Hamid}, title = {Identification of Cleaner Production criteria at Kimia Choob Medium Density Fiber Board}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {225-240}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The production operation plays a crucial role in reducing the environmental impacts in various stages of the life cycle of products, from the extraction of materials to production, end-use, reuse, and recycling. Therefore, the process of reducing these environmental impacts in relation to production contributes to achieving competitive advantages and increased market shares. As such, discursive approaches to prevent industries from acting as pollutants are proposed. Since the medium density fiberboard industry is among the industries which consume high volumes of materials and energy, this study is considered to be a strategic model for enhancing efficiency and minimizing pollution and energy consumption within the framework of continuous improvement of the protection of the environment. To this aim, through the AHP, a three-level hierarchy, five criteria (product modification, process change, bill of material implementation, recycling, and human resources), and 45 sub-criteria were analyzed at Kimia Choob Medium Density Fiberboard Industry. The overall results showed that process change, among the main criteria, and planning to prevent unnecessary stoppage in machinery and equipment used as a sub-criterion were identified as the highest priorities. The total inconsistency ratio is 0.1, which proves the consistency of the results.}, keywords = {Cleaner production,Analytical hierarchy process,Medium Density Fiberboard (MDF),criteria}, title_fa = {تعیین شاخص‌های تولید پاک‌تر در کارخانه تخته فیبر با دانسیته متوسط (MDF) مطالعه موردی: کیمیا چوب گلستان}, abstract_fa = {عملیات تولید نقش کلیدی در کاهش آثار محیط‌زیستی در مراحل مختلف چرخۀ عمر محصول از استخراج مواد تا تولید، استفاده نهایی، استفاده مجدد و بازیافت دارند؛ بنابراین درک مسئولیت محیطی درزمینۀ تولید موجب دستیابی به مزیت رقابتی و افزایش سهم بازار محصولات می­شود؛ بنابراین رویکردهای مباحثی مختلف ازجمله تولید پاک‌تر به‌منظور پیشگیری از آلایندگی صنایع مطرح می­گردند. ازآنجایی‌که صنعت تخته فیبر دانسیته متوسط ازجمله صنایعی است که حجم زیادی از مواد و انرژی را مصرف می­کند، این تحقیق به­عنوان یک مدل راهبردی برای افزایش بهره­وری و به حداقل رساندن آلودگی و مصرف انرژی در چارچوب بهبود مستمر حفاظت از محیط‌زیست در تولید تخته فیبر دانسیته متوسط در نظر گرفته‌شده است. بدین منظور با به‌کارگیری فرآیند تحلیل سلسله‌مراتبی، یک سلسله با سه سطح، 5 شاخص (اصلاح محصول، تغییر فرآیند، درخت محصول، بازیافت و سرمایه­های انسانی) و 45 زیر شاخص در شرکت تخته فیبر دانسیته متوسط کیمیا چوب جهت تولید پاک‌تر ساختار­دهی شد. سپس از طریق روش دلفی (پرس‌وجو از افراد متخصص در امر) مقایسات زوجی انجام شد. نتایج در ارزیابی کلی نشان داد که شاخص تغییر فرآیند بالاترین اولویت را در بین شاخص­ها و برنامه­ریزی جهت جلوگیری از توقف بی­مورد دستگاه­ها و تجهیزات بالاترین اولویت را در بین کلیه زیر­شاخص­ها داشته است. نرخ ناسازگاری کلی در این بررسی 1/0 است که دلالت بر ثبات نتایج به‌دست‌آمده دارد.}, keywords_fa = {تولید پاک‌تر,فرآیند تحلیل سلسله‌مراتبی,تخته فیبر با دانسیته متوسط (MDF),شاخص و زیر شاخص}, url = {https://www.ijwp.ir/article_37222.html}, eprint = {https://www.ijwp.ir/article_37222_0db8fd818857c9f0c610a2c03365cdc2.pdf} } @article { author = {Hajihassani, Reza and Mohebbi, Behbood and Kazemi najafi, saeed}, title = {The effect of hygro-thermo-mechanical modification on the applied properties of glulam made from poplar}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {241-253}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The objective of this study was to investigate the physical and mechanical properties of glulam made from compressed poplar wood (Populus deltoides) by technique of Combined Hygro-Thermo-Mechanical Treatment (CHTMT) which is combination of two techniques of hygrothermal treatment and densification of wood. The poplar wood blocks were initially treated hygrothermally at temperatures of 130, 150, and 170°C for holding times of 20 and 40 minutes. Afterwards, the densification process was carried out under a hot press (at 160°C for 20 minutes) at two levels of compression set, i.e. 40 and 60 percent based on the blocks thickness (radial direction). For production of glulam, the blocks were jointed together by finger joint and polyurethane resin. The produced glulam were physically and mechanically tested for its water absorption, radial and tangential swelling, delamination, bending strength, modulus of elasticity and shear strength. Results revealed that physical and mechanical properties of glulam were enhanced due to the CHTMT treatment. According to the results, water absorption and radial swelling of glulam were increased due to the CHTMT, significantly. Moreover, this treatment reduced the delamination of samples after soaking- drying cycles. It was also found that the CHTMT could significantly enhance mechanical properties of glulam such as bending strength and bending modulus of the elasticity; but decreases shear strength of glue line. Generally, results showed positive effects of CHTMT in glulam production.}, keywords = {Glulam,Combined Hygro-Thermo-Mechanical Treatment (CHTMT),Physical and mechanical properties,Compression set}, title_fa = {تأثیر اصلاح بخار گرمایی- مکانیکی بر خواص کاربردی گلولام ساخته‌شده از چوب صنوبر}, abstract_fa = {هدف از این تحقیق، بررسی خواص فیزیکی و مکانیکی گلولام ساخته‌شده از چوب صنوبر (Populus deltoides) فشرده‌شده با فرایند ترکیبی بخار گرمایی- مکانیکی (ترکیبی از دو تکنیک تیمار بخار گرمایی و عملیات فشرده­سازی) بود. در این بررسی تیمار بخار گرمایی چوب صنوبر در دماهای 130، 150 و 170 درجه سانتی‌گراد و مدت زمان­های ماندگاری 20 و 40 دقیقه انجام شد. سپس تیمار فشرده‌سازی چوب صنوبر در دمای پرس 160 درجه سانتی‌گراد، زمان پرس 20 دقیقه و با دو ضریب فشردگی 40 و 60 درصد (جهت شعاعی) صورت پذیرفت. برای ساخت گلولام، از اتصال انگشتی و چسب پلی اورتان استفاده گردید. خواص فیزیکی و مکانیکی گلولام ساخته‌شده ازجمله جذب آب، واکشیدگی شعاعی و مماسی، جدا شدن لایه­ها، مقاومت خمشی، مدول الاستیسیته و مقاومت برشی خط چسب موردبررسی قرار گرفت. نتایج نشان داد که خواص فیزیکی و مکانیکی گلولام ساخته‌شده از چوب صنوبر تیمار شده با فرایند بخار گرمایی- مکانیکی افزایش می­یابد. بر اساس نتایج میزان جذب آب و واکشیدگی شعاعی گلولام ساخته‌شده از چوب­های تیمار شده با فرایند ترکیبی بخار گرمایی- مکانیکی افزایش می­یابد. همچنین فرایند ترکیبی بخار گرمایی- مکانیکی سبب کاهش میزان جدا شدن لایه­های گلولام پس از چرخه­های غوطه­وری- خشکاندن می­گردد. ویژگی­های مکانیکی گلولام­های ساخته‌شده ازجمله مقاومت خمشی و مدول الاستیسیته خمشی در اثر تیمار ترکیبی بخار گرمایی- مکانیکی افزایش‌یافته؛ اما مقاومت برشی خط چسب گلولام­ها در اثر این تیمار کاهش می­یابد. لذا نتایج بیانگر بهبود برخی خواص فیزیکی و مکانیکی گلولام در اثر فرایند ترکیبی بخار گرمایی می­باشد.}, keywords_fa = {گلولام,تیمار ترکیبی بخار گرمایی- مکانیکی,ویژگی‌های فیزیکی و مکانیکی,ضریب فشردگی}, url = {https://www.ijwp.ir/article_37610.html}, eprint = {https://www.ijwp.ir/article_37610_84ebd8d0cf7236f92ac0e916f3dea56a.pdf} } @article { author = {نظرنژاد, نورالدین and Rezanezhad, saghaigh and sharifi, hasan}, title = {Study on the ability of lignocellulosic materials to absorb crude oil from aqueous media}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {255-267}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Crude oil is a toxic product for biological systems and is an important contaminant in the marine environment. So far, many methods have been used to clean up oil pollution in the seas, one of which is purification by a variety of adsorbents. In this study, wood lignocellulosic sorbents of poplar species in three forms of sawdust, straw, and wood chips and fibers in three forms of chemical, mechanical and recycled pulp were investigated for the cleanup of oil contamination from the water surface. Also, the effect of adsorbent weight, temperature, and crude oil concentration, each in three levels, were other variables in this study. The results of the studies showed that the absorption rate of crude by the six different adsorbents with different weights and temperatures had a significant difference. Also, the results showed that among the adsorbents, mechanical pulp having the absorption rate of 90.5% and wood chips having the absorption rate of 39% had the highest and the lowest amount of purification of crude oil from aqueous media.}, keywords = {adsorbent,Environmental pollution,Crude oil,Lignocellulosic material}, title_fa = {مطالعه توانایی جذب نفت خام از محیط آبی توسط مواد لیگنوسلولزی}, abstract_fa = {نفت خام یک فرآورده سمی برای سیستم­های بیولوژیک است و آلوده‌کننده مهم محیط‌زیست دریایی محسوب می­شود. تاکنون روش­های زیادی جهت پاک‌سازی آلودگی­های نفتی در دریاها مورداستفاده قرارگرفته که یکی از آن­ها پاک‌سازی به‌وسیله‌ی انواع جاذب­ها هست. در این پژوهش، جاذب­های لیگنوسلولزی چوب گونه صنوبر در سه شکل آرد، پوشال و خرده چوب و الیاف به سه شکل خمیرکاغذ شیمیایی، مکانیکی و بازیافتی جهت پاک‌سازی آلودگی­های نفتی از سطح آب بررسی‌شده است. به­علاوه تأثیر وزن جاذب­ها، دمای محیط جذب و غلظت نفت خام نیز هرکدام در سه سطح جزو متغیرهای دیگر این تحقیق می­باشند. نتایج این تحقیق نشان داد که میزان جذب نفت خام توسط شش جاذب مختلف با وزن­های متفاوت و دماهای مختلف دارای تفاوت معنادار هست. همچنین با بررسی نتایج و کارایی جذب مشخص شد که در بین جاذب­ها، خمیرکاغذ مکانیکی با مقدار جذب 5/90 درصد و خرده چوب با مقدار جذب 39 درصد به ترتیب بیشترین و کمترین میزان پاک‌سازی نفت خام از روی آب را داشتند.}, keywords_fa = {جاذب,آلودگی ‌محیط‌زیستی,نفت خام,مواد لیگنوسلولزی}, url = {https://www.ijwp.ir/article_37828.html}, eprint = {https://www.ijwp.ir/article_37828_33bf4dfacb77005036795e0941f56a40.pdf} } @article { author = {Azizi Mossello, Ahmad and Tarahi, Roghayieh}, title = {Survey on public awareness and participation in waste separation from Behbahan city}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {269-279}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {At present, public awareness and participation in waste separation from the source have not been applicable much due to the management rules and lack of familiarity with the urban affairs of the city administration. Therefore, the purpose of this study was to investigate the level of public awareness and participation in waste separation in Behbahan city. For this purpose, a descriptive and analytical research method was used by the field method. The statistical population of the study was the citizens of Behbahan city in 2019 among whom a sample of 384 people was selected by simple random sampling and a questionnaire was distributed. The results showed that 50.5% of the population had a moderate level of knowledge regarding waste separation. Based on the level of awareness of the subject, people are aware of: the need to separate waste from the source for a sustainable society, to have adequate information for waste storage, to protect the environment by reducing waste generation, and to reduce environmental pollution by reducing waste generation, respectively. However, they were poorly aware of the usefulness of separating waste from the source for the community and having space for the waste generated with the economic benefits of waste collection. The findings also showed that 58.8% of the people are low in terms of participation. Based on the extent of popular participation by the subject; based on the use of waste separation training programs by source, separation of recyclable waste components from source and avoidance of spillage of waste on the street, motivation, and purpose in separating waste from source, respectively were good partnerships. But they were poorly involved in planning to reduce waste production and participate in training programs.}, keywords = {waste separation from source,Awareness,public participation,Behbahan}, title_fa = {بررسی میزان آگاهی و مشارکت همگانی ‏‏در زمینه تفکیک زباله از مبدأ شهرستان بهبهان}, abstract_fa = {در حال حاضر آگاهی و مشارکت مردم در امور تفکیک زباله از مبدأ به دلیل قوانین مدیریتی و عدم آشنایی مردم در اداره‌ی امور شهر هنوز نتوانسته چندان خودنمایی نماید. بر این اساس، هدف از انجام این پژوهش بررسی میزان آگاهی و مشارکت همگانی ‏‏در زمینه تفکیک زباله از مبدأ شهرستان بهبهان است. بدین منظور از روش تحقیق توصیفی و تحلیلی با استفاده از روش میدانی استفاده شد. جامعه آماری پژوهش را شهروندان شهرستان بهبهان در سال 1398 تشکیل می‏دهند که از میان آن‏ها نمونه‏ای به حجم 384 نفر به روش تصادفی ساده انتخاب و اقدام به توزیع پرسشنامه شد. نتایج نشان داد که در زمینه تفکیک زباله از مبدأ 5/50 درصد مردم از سطح آگاهی متوسط برخوردار بودند. بر اساس سطح آگاهی به تفکیک موضوع؛ ضرورت تفکیک زباله از مبدأ برای داشتن جامعه پایدار، داشتن اطلاعات مناسب برای ذخیره زباله، حفظ محیط‌زیست با کاهش تولید زباله و کاهش آلودگی‏های محیطی با کاهش تولید زباله از آگاهی خوبی برخوردار هستند؛ اما در زمینه سودمندی تفکیک زباله از مبدأ برای جامعه و داشتن فضا برای زباله تولیدشده با فواید اقتصادی جمع‏آوری زباله از آگاهی ضعیفی برخوردار بودند. همچنین یافته‏های پژوهش نشان داد، 8/58 درصد مردم مشارکت کم دارند. بر اساس میزان مشارکت مردمی به تفکیک موضوع؛ بر اساس استفاده از برنامه‏های آموزشی تفکیک زباله از مبدأ، جداسازی اجزای قابل بازیافت زباله از مبدأ و پرهیز از ریخت‌وپاش زباله در کوچه و خیابان، انگیزه و هدف در تفکیک زباله از مبدأ از مشارکت خوبی برخوردار هستند؛ اما در زمینه برنامه‏ریزی برای کاهش تولید زباله و شرکت در برنامه‏های آموزشی از مشارکت ضعیفی برخوردار بودند.}, keywords_fa = {تفکیک زباله از مبدأ,آگاهی,مشارکت مردمی,بهبهان}, url = {https://www.ijwp.ir/article_37829.html}, eprint = {https://www.ijwp.ir/article_37829_738ecf036b2992535b2023efc0413544.pdf} } @article { author = {Ghofrani, Mohammad and mohamadmoradi, zahra}, title = {Investigating the effectiveness and impact of factors affecting the growth and economic development of the classical furniture industry (Case study: Tehran province)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {281-292}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The purpose of this study was to investigate the factors affecting the economic growth of the classical furniture industry and to present a model of the impact status and effectiveness of the Air Conditioning Index. Soon after interviewing wood industry professors, experts, and certified furniture manufacturers, Delphi techniques, production management indicators, Product quality, human factors, design, marketing, and economics were identified. Using the DEMATEL technique, the degree of impact-effectiveness of each of the indicators was determined and the model was presented accordingly. The results showed that the marketing and economics index (9.736) had the highest impact on other indices and in order to improve economic and marketing status, it is necessary to address firstly human factors (1.45) and then to design and quality of furniture (0.0204). Also, production management (19.080), which is at the top of the production process of a product, has the most interaction with other indicators.}, keywords = {Economic Development,Furniture industry,DEAMATEL techniques mutual interaction,production management}, title_fa = {بررسی میزان تأثیرگذاری و تأثیرپذیری عوامل مؤثر بر رشد و توسعه اقتصادی صنعت مبلمان کلاسیک (مطالعه موردی استان تهران)}, abstract_fa = {هدف از این تحقیق بررسی عوامل مؤثر بر رشد اقتصادی صنعت مبلمان کلاسیک و ارائه مدلی از وضعیت تأثیرگذاری و تأثیرپذیری شاخص­های موردبررسی در این پژوهش بود. بدین منظور پس از مصاحبه با اساتید رشته صنایع چوب، متخصصان و تولیدکنندگان خبره مبلمان، به کمک تکنیک دلفی شاخص­های مدیریت تولید، کیفیت محصول، عوامل انسانی، طراحی و اقتصاد به‌عنوان شاخص­های مؤثر شناسایی شد. با استفاده از تکنیک دیمتل میزان تأثیرگذاری- تأثیرپذیری هریک از شاخص­ها مشخص و بر این اساس مدل ارائه گردید. نتایج نشان داد شاخص اقتصاد بالاترین تأثیرپذیری (736/9) را نسبت به سایر شاخص­ها دارد و برای بهبود وضعیت اقتصادی لازم است در درجه اول به عوامل انسانی (45/1) و بعدازآن به طراحی (237/0) و کیفیت مبلمان (204/0) توجه کرد. همچنین مدیریت تولید (080/19) که در رأس فرایند تولید یک محصول می باشد، دارای بیشترین تعامل با سایر شاخص­ها هست.}, keywords_fa = {توسعه اقتصادی,صنعت مبلمان,تکنیک دیمتل,اثرات متقابل,مدیریت تولید}, url = {https://www.ijwp.ir/article_37830.html}, eprint = {https://www.ijwp.ir/article_37830_067c9020d8a34d69f3fb88cc39fb1651.pdf} } @article { author = {Ramezanpour, Milad and Oladi, Reza and Ahmadzadeh, Masoud and Tarmian, Asghar}, title = {Bio-control of white and brown rot in beech and spruce wood using Bacillus amyloliquefaciens}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {293-304}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Nowadays, new and environmentally-friendly methods of wood preservation have been focused. One of these methods is the bio-protection of wood against destructive agents in which microorganisms are used to protect the wood instead of chemicals. The aim of this study was to protect the beech and spruce wood against white and brown rot using a bacterium extracted from beech (Bacillus amyloliquefacien). For this purpose, B. amyloliquefaciens was first placed in a dual culture medium against wood-destroying fungi and then in wood specimens. The results showed that this bacterium inhibited the growth of destructive fungi in both media. The studied bacterium is capable of producing chitinase, amylase, and cellulase enzymes and the microscopic study confirmed the results of weight loss tests. Overall, here, for the first time, B. amyloliquefaciens is proposed as an efficient bio-control of wood decay.  }, keywords = {wood decay,decay pattern,wood bio-protection,Antagonism}, title_fa = {حفاظت زیستی چوب‌های راش و نوئل در برابر قارچ‌های مولد پوسیدگی سفید و قهوه‌ای با استفاده از باکتری باسیلوس آمیلولیکوفاسینس}, abstract_fa = {امروزه، شیوه‌های نوین و دوستدار محیط‌زیست برای حفاظت چوب موردتوجه قرارگرفته‌اند. یکی از این شیوه‌ها، حفاظت زیستی چوب در برابر عوامل مخرب است که در آن به‌جای مواد شیمیایی، از میکروارگانیسم‌های زنده استفاده می‌شود. هدف از این پژوهش، حفاظت زیستی چوب‌های راش و نوئل در برابر قارچ‌های مولد پوسیدگی سفید (Trametes versicolor) و قهوه‌ای (Coniophora puteana) با استفاده از باکتریِ استخراج‌شده از راش (باسیلوس آمیلولیکوفاسینس) بود. به این منظور، قدرت بازدارندگی باکتری در برابر قارچ‌های مخرب چوب، ابتدا در محیط کشت دوگانه و سپس در بستر چوبی مورد ارزیابی قرار گرفت. نتایج نشان داد که این باکتری به‌طور چشم­گیری رشد قارچ‌های عامل پوسیدگی را در هر دو محیط مهار می­کند. این باکتری توانایی تولید آنزیم‌های کیتیناز، آمیلاز و سلولاز را داشته و بررسی­های میکروسکوپی، نتایج آزمون کاهش جرم را تائید کرد. درمجموع، در این پژوهش، باکتری موردبررسی برای نخستین بار به‌عنوان عاملی کارآمد در کنترل زیستی در چوب آلات پیشنهاد می­شود.}, keywords_fa = {پوسیدگی قارچی,الگوی تخریب,حفاظت زیستی چوب,آنتاگونیسم}, url = {https://www.ijwp.ir/article_38000.html}, eprint = {https://www.ijwp.ir/article_38000_6f2f70f8f669d083216e2b4d150a9d86.pdf} } @article { author = {حسن پور تیچی, علی and Rezanezhad Divkolae, mojtaba}, title = {Changes of Biometric, Physical and Anatomical Properties of juvenile wood and mature wood of Morus alba tree in Longitudinal and Transverse Directions}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {305-316}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, we investigated the biometrical properties of fibers, the physical and microscopic properties of Morus alba wood. For this purpose, three healthy mulberry trees were randomly selected and cut in Babol city (Mazandaran province). Three discs of 5 cm thickness were prepared at breast height, 3 m height, and 4.5 m height. In the transverse direction, the test specimens were cut 2 × 2 cm to 3 cm from the pith to the bark sequentially and examined. Then the biometric properties of fibers including fiber length, fiber lumen diameter, fiber diameter, and cell wall thickness were measured. Also, microscopic sections of wood close to the pith and bark were studied using light microscopy according to the List of International Association of Wood Anatomists (IAWA). Anatomy of the wood near the pith and bark of the Morus alba tree revealed differences. Vessel grouping and its arrangements near the pith were more radially, while these features were more clustered near the bark. Rays in the area of the pith were more heterogeneous, while near the bark, many rays were homogeneous. The mean tangential vessel diameter near the larger bark (237 microns) was greater than that of the near-pith wood (144 microns). The porosity of wood was observed to be ring porous, near the bark, and semi ring porous near the pith. The results also showed that there was a significant difference in both the transverse and longitudinal directions of the Morus alba tree in terms of length, fiber diameter, fiber lumen diameter, and the cell wall thickness. The biometric properties of the fibers increased from the pith to the bark. The mean length, total diameter, fiber lumen diameter and cell wall thickness of the fibers were 1.51 mm, 27.25 µm, 18.74 µm, and 8.5 µm, respectively.}, keywords = {Morus alba,basic,ring porous,clusters}, title_fa = {تغییرات خواص بیومتری، فیزیکی و آناتومی جوان‌چوب و چوب بالغ درخت توت (Morus alba) در جهت طولی و عرضی ساقه درخت}, abstract_fa = {در این تحقیق ویژگی بیومتری الیاف، خواص فیزیکی و میکروسکوپی چوب توت موردبررسی قرارگرفته است؛ بنابراین به‌صورت تصادفی، سه اصله درخت سالم توت واقع در شهرستان بابل (استان مازندران) انتخاب و قطع شد. سه دیسک به ضخامت 5 سانتی‌متر در ارتفاع برابرسینه، ارتفاع 3 متر و ارتفاع 5/4 متر تهیه و در جهت عرضی نمونه‌های آزمونی cm2×2 به طول cm 3 از مغز به سمت پوست به‌صورت متوالی بریده و موردبررسی قرار گرفت. سپس خواص بیومتری الیاف شامل طول الیاف، قطر حفره سلولی، قطر کلی فیبر و ضخامت دیواره سلولی اندازه‌گیری شد. ویژگی‌های فیزیکی شامل دانسیته بحرانی و دانسیته خشک محاسبه شدند. همچنین مقاطع میکروسکوپی چوب نزدیک به مغز و پوست با استفاده از میکروسکوپ نوری موردمطالعه دقیق مطابق با لیست آناتومیست های جهان (IAWA) قرار گرفت. بررسی آناتومی در چوب نزدیک مغز و پوست گونه توت بیانگر تفاوت‌هایی هست. گروه‌بندی آوندها و نحوه استقرار آن در نزدیک مغز، بیشتر چندتایی در راستای شعاعی و در نزدیک پوست، بیشتر از نوع خوشه‌ای دیده شدند. اشعه‌چوبی در محدوده مغز، ناهمگن‌تر بوده درحالی‌که در نزدیک پوست، بسیاری از اشعه‌ها همگن می‌باشند. میانگین قطر مماسی حفرات آوندی در نزدیک پوست، بزرگ‌تر (237 میکرون) از چوب نزدیک مغز (144 میکرون) و همچنین ازلحاظ تخلخل در این چوب تفاوت‌هایی مشاهده‌شده است که در نزدیک پوست به‌صورت بخش روزنه‌ای و در نزدیک مغز به‌صورت نیمه بخش روزنه‌ای بوده است. نتایج بررسی‌ها حاکی از آن است که دانسیته خشک و بحرانی از مغز به سمت پوست درخت روند صعودی و از پایین درخت به سمت تاج درخت روند نزولی داشته است؛ و نتایج بیومتری الیاف بیانگر آن است در درخت توت هم در جهت عرضی و هم در جهت طولی ازلحاظ طول، قطر الیاف، قطر حفره سلولی و ضخامت دیواره سلولی اختلاف معنی‌داری وجود دارد. بطوریکه خواص بیومتری الیاف از مغز به سمت پوست روند صعودی داشتند. میانگین طول، قطر کلی، قطر حفره سلولی و ضخامت دیواره الیاف به ترتیب برابر با 51/1 میلی‌متر، 25/27 میکرون، 74/18 میکرون و 5/8 میکرون اندازه‌گیری شد.}, keywords_fa = {توت,بحرانی,بخش روزنه‌ای,خوشه‌ای}, url = {https://www.ijwp.ir/article_38023.html}, eprint = {https://www.ijwp.ir/article_38023_6b2cc6f675e030f139a4781fcea8d0ca.pdf} } @article { author = {Edalat, Hamidreza and Afshari, Reza and Khazaeian, Abolghasem and Rasouli, Davoud}, title = {Effect of species type and sanding sequence on the adhesion strength and the interphase region of Polyurethane coating and veneer}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {317-332}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The purpose of this research was the investigation of sanding sequence and coating thickness effect on adhesion strength of coating in two species: beech and elm. For this purpose, beech and elm veneers with 0.6 mm thickness were laminated on MDF with 16 mm thickness by UF and hot press. The surface of the laminated panels was sanded by two different sequences; the soft (180-280 grits) and rough (150-180 grits) one. Before the coating application, the surface was sanded with 400 grits. Then they were coated with polyurethane in two forms of one and two-layered coating. After that, the adhesion strength test was done on specimens according to ASTM D4541. To have a more precise investigation of the interphase region of coating-veneer, photomicrographs were captured by fluorescent microscopy to analyze and calculate the effective penetration parameter of the coating into the wood texture. The results showed that two species respond to sanding sequences differently and a thicker coating layer increased the adhesion strength. Beech as a diffuse-porous wood had the finer texture and higher density compared with elm. Therefore, the adhesion strength of the beech veneer was declined by 13.8 % and reaches 2.59 MPa due to the use of a rough sanding sequence. However, these sequences caused the opposite result in elm veneer and led to a 25.7 % adhesion improvement (3.23 MPa). The study on microphotographs and the effective penetration parameter stated that an even thickness of the coating layer and effective penetration reduction has been possible when the rough sequence and soft one are applied on elm and beech, respectively.}, keywords = {Adhesion Strength,Interphase region,Polyurethane coating,Veneer,Sanding sequence}, title_fa = {تأثیر نوع گونه و توالی پرداخت بر مقاومت چسبندگی و ناحیه اینترفاز پوشش پلی اورتان و روکش طبیعی چوب}, abstract_fa = {هدف از این تحقیق بررسی تأثیر توالی پرداخت و ضخامت پوشش بر مقاومت چسبندگی آن در دو گونه راش و ملج بود. برای این منظور روکش­های راش و ملج با ضخامت 6/0 میلی‌متر با استفاده از چسب اوره فرم آلدئید و پرس گرم بر روی تخته فیبر دانسیته متوسط با ضخامت 16 میلی‌متر روکش‌کاری شدند. سطح پانل­های روکش شده به­وسیله کاغذهای سنباده با دو نوع توالی پرداخت نرم (280-180) و زبر (180-150) پرداخت شدند. پیش از اعمال پوشش، پرداخت نهایی با سنباده درجه 400 انجام گردید. سپس با استفاده از پوشش پلی اورتان سطح محصولات به‌صورت تک لایه و دولایه پوشش داده شد. سپس آزمون چسبندگی پوشش طبق استاندارد ASTM D4541 بر روی نمونه­ها انجام گردید. به‌منظور بررسی دقیق­تر ناحیه اینترفاز پوشش-روکش، تصاویری به کمک میکروسکوپ فلوئورسنت جهت آنالیز و محاسبه نفوذ مؤثر پوشش پلی اورتان به دورن بافت چوب تهیه شدند. نتایج نشان دادند که دو گونه پاسخ­های متفاوتی نسبت به توالی­های پرداخت نشان می­­دهند و افزایش ضخامت پوشش نیز در اغلب موارد مقاومت چسبندگی را بهبود می­دهد. روکش راش به‌عنوان یک‌گونه پراکنده آوند نسبت به ملج با ساختار بخش روزنه­ای، تراکم بیشتر و بافت ریزتری داشت و به همین دلیل در اثر اعمال توالی پرداخت زبر مقاومت چسبندگی پوشش آن 8/13 درصد کاهش یافت و به 59/2 مگا پاسکال رسید ولی توالی مذکور در روکش ملج نتیجه عکس داشت و موجب بهبود چسبندگی به میزان 7/25 درصد و رسیدن آن به مقدار 23/3 مگا پاسکال گردید. بررسی تصاویر میکروسکوپی و پارامتر نفوذ مؤثر نیز بیانگر این نکته بود که دستیابی به ضخامت یکنواخت پوشش و کاهش نفوذ مؤثر آن برای گونه ملج در توالی پرداخت زبر و برای راش در توالی نرم ممکن می­­گردد.}, keywords_fa = {مقاومت چسبندگی,ناحیه اینترفاز,پوشش پلی اورتان,روکش طبیعی,توالی پرداخت}, url = {https://www.ijwp.ir/article_38024.html}, eprint = {https://www.ijwp.ir/article_38024_714f0fff21e99557f309dc426b07718b.pdf} } @article { author = {Jonoobi, Mehdi and moradpour, payam and Tofangchi Kalle basti, ali akbar}, title = {Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {333-344}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {One application of hydrogels is to use them as dressings (wounds and burns). Biocompatibility and cytotoxicity are of particular significance for hydrogels used in the medical field. Cellulosic materials can load and relief drugs at temperatures or pH levels of the body as a result of contrary processes such as diffusion. The aim of this study was to investigate the mechanism of release of silver nitrate in nano-cellulose-based biodegradable hydrogel film for burn repair. To prepare a hydrogel in the form of film, cellulose nanofibers and hydroxyethyl cellulose were used with the weight ratio (3:1), and also, the citric acid was used as a crosslinker in different amounts of 10 and 20 wt% matrix. Later on, the loading silver nitrate as a disinfectant drug into selected hydrogels was performed. Drug release results illustrated that there was a direct relationship between absorption rate and drug concentration. In the initial times of the testing, 70 to 90% of the drug release was detected and then for 24 h, the drug was gradually released from the hydrogel. Investigation of modeling drug-releasing selected kinetic diffusion as the dominant mechanism in drug delivery. MTT non-toxicity test displayed high efficacy of nanocellulose cationization and confirmed the non-toxicity of biocompatible hydrogels. It can be concluded that biodegradable nanocellulose based hydrogel containing silver nitrate can be used as an appropriate and relevant product for burn repair.}, keywords = {Hydrogel,Burning dressing,Nanocellulose,Silver nitrate}, title_fa = {بررسی مکانیسم رهایش نیترات نقره در پد هیدروژل بر پایه نانو سلولز جهت ترمیم سوختگی}, abstract_fa = {یکی از کاربردهای هیدروژل­ها، استفاده از آن به­عنوان پانسمان (زخم و سوختگی) می­باشد. زیست­سازگاری و عدم سمیت سلولی برای هیدروژل­های مورداستفاده در زمینه پزشکی اهمیت ویژه‌ای دارد. مواد سلولزی می­توانند داروها را بارگذاری کرده و در شرایط دمایی و یا pH سطح بدن در اثر فرآیندهای مختلف مانند انتشار، داروها را آزاد کنند. هدف از این مطالعه بررسی مکانیسم رهایش نیترات نقره در فیلم هیدروژل زیست‌تخریب‌پذیر بر پایه نانوسلولز جهت ترمیم سوختگی بود. جهت تهیه فیلم هیدروژل، از نانوالیاف سلولزی و هیدروکسی اتیل سلولز با نسبت وزنی (3 به 1) و همچنین از سیتریک اسید به‌عنوان اتصال‌دهنده عرضی با مقادیر 10 و 20 درصد وزنی نسبت به بستر استفاده شد. سپس بارگذاری نیترات نقره به‌عنوان یک داروی ضدعفونی‌کننده به هیدروژل­­های تهیه‌شده انجام شد. نتایج رهایش دارو نشان داد که رابطه خطی بین میزان جذب و غلظت داروی مربوطه وجود دارد. در ساعات اولیه آزمایش، 70 تا 90 درصد از رهایش دارو مشاهده شد و سپس تا 24 ساعت، دارو به‌آرامی از هیدروژل آزاد گردید. مدل‌سازی رهایش دارو، انتشار فیک را به‌عنوان مکانیسم غالب در تحویل دارو انتخاب کرد. آزمون عدم سمیت MTT، اثربخشی بالای کاتیونیزاسیون نانوسلولز را نشان داد و مؤید عدم سمیت هیدروژل­های بر پایه مواد زیست سازگار بود. می­توان نتیجه­گیری کرد که هیدروژل زیست‌تخریب‌پذیر بر پایه نانوسلولزکه حاوی نیترات نقره است، به‌عنوان یک محصول کاملاً مناسب و کاربردی جهت ترمیم سوختگی قابل‌استفاده می­باشد.}, keywords_fa = {هیدروژل,پانسمان سوختگی,نانوسلولز,نیترات نقره}, url = {https://www.ijwp.ir/article_38992.html}, eprint = {https://www.ijwp.ir/article_38992_625551da63f7cad12641c396b96f0825.pdf} }