@article { author = {Dahmardeh Ghalehno, Mohammad and Masteri Farahani, mohammadreza and Madhoushi, mehrab and rasouli, davood and shakeri, alireza and ghasemi, esmaeil}, title = {Effect of weathering on Surface properties of HDPE-based wood plastic composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {483-496}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, Effect of weathering on Surface properties of HDPE-based wood plastic composites was investigated. The variable factors were titanium dioxide nanoparticles content (0, 1, 2 and 3%), raw material type (heat treated wood and untreated wood) and photo stabilizer (0 and 1%). Lightness index (L*) and color changes (∆E) were investigated after 0, 500, 1000 and 1500 hours weathering. Chemical changes and surface deterioration that occurred due to weathering were also analyzed using Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM) before and after 1500 hours weathering. Transform Infrared Spectroscopy (FTIR) of WPCs showed that carbonyl index increased and wood index decreased after weathering. Scanning electron microscopy (SEM) also showed that weathered samples experienced surface deterioration. Wood plastic composites containing titanium dioxide nanoparticles, thermowood (heat treated wood) and tinuvin 328 (photo stabilizer) showed less surface cracks after weathering compared to control sample. Carbonyl index and wood index changes of samples containing titanium dioxide nanoparticles, thermowood and tinuvin 328 decreased after weathering compared to control sample. The results also showed that lightness index and color change of samples increased after weathering. The color stability of WPCs was improved by using of wood plastic composites containing titanium dioxide nanoparticles, thermowood and tinuvin 328.}, keywords = {titanium dioxide nano,thermowood,tinuvin 328,Weathering}, title_fa = {تأثیر هوازدگی بر خواص سطح چند سازه های چوب- پلی اتیلن با دانسیته بالا}, abstract_fa = {در این مطالعه، تأثیر هوازدگی بر خواص سطح چند سازه های چوب- پلی اتیلن با دانسیته بالا بررسی شد. عوامل متغیر شامل میزان ماده نانو دی اکسید تیتانیوم (0، 1، 2 و 3 درصد)، نوع ماده اولیه (چوب تیمار حرارتی شده و چوب بدون تیمار) و تثبیت کننده نوری (0 و 1 درصد) بودند. شاخص روشنایی (L*) و تغییر رنگ (∆E) در زمان های 0، 500، 1000 و 1500 ساعت بررسی گردیدند. تغییرات شیمیایی و تخریب سطحی که در نتیجه هوازدگی بوجود آمدند نیز با استفاده از طیف سنجی تبدیل فوریه مادون قرمز (FTIR) و میکروسکوپ الکترونی (SEM) قبل و بعد از 1500 ساعت هوازدگی آنالیز شدند. طیف سنجی تبدیل فوریه مادون قرمز (FTIR) چند سازه های چوب پلاستیک نشان داد که بعد از هوازدگی، شاخص کربونیل افزایش و شاخص چوب کاهش پیدا کرد. میکروسکوپ الکترونی (SEM) نیز نشان داد که نمونه های هوازده شده دچار تخریب سطحی شده اند. چند سازه های چوب پلاستیک حاوی نانو ذرات دی اکسید تیتانیوم، ترموود (چوب تیمار حرارتی شده) و تینوین 328 (تثبیت کننده نوری)، ترک های سطحی کمتری بعد از هوازدگی در مقایسه با نمونه شاهد از خود نشان دادند. تغییرات شاخص کربونیل و شاخص چوب نمونه های حاوی نانو ذرات دی اکسید تیتانیوم، ترموود و تینوین 328، بعد از هوازدگی در مقایسه با نمونه شاهد کاهش پیدا کرد. نتایج همچنین نشان داد که شاخص روشنایی و تغییر رنگ نمونه ها بعد از هوازدگی افزایش پیدا کرد. با استفاده از نانو دی اکسید تیتانیوم، ترموود و تینوین 328، ثبات رنگ چند سازه های چوب پلاستیک بهبود بخشیده شد.}, keywords_fa = {نانو دی اکسید تیتانیوم,ترموود,تینوین 328,هوازدگی}, url = {https://www.ijwp.ir/article_22806.html}, eprint = {https://www.ijwp.ir/article_22806_22b29027801f888ca5202228dc2ab2ca.pdf} } @article { author = {salehpour, shobo and jonoobi, mahdi and Oksman, kristina and ahmadzadeh, masoud and Khanali, majid}, title = {Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {497-508}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The aim of this study was to improve the properties of polyvinyl alcohol (PVA) by using cellulose nanofibers (CNF) as a reinforcement. In order to improve the compatibility and miscibility with PVA matrix, freeze drying method was applied. The nanocomposites based on PVA with values 5, 10, 20 and 30wt% of CNF were prepared by freeze-drying and the effect of CNF addition on the mechanical and dynamical mechanical properties, moisture sorption, barrier and biodegradability of the nanocomposites was studied. The tensile strength and elastic modulus of PVA films were improved by the addition of CNF. The nanocomposite with 10wt% nano-fibers had the highest tensile strength and lowest modulus of elasticity and the elongation at break. The results indicated that the storage modulus (E′) of PVA was considerably improved with the introduction of CNF into - polymer matrix. The water vapor permeability decreased from 7.31 to 2.1×10-7 g/m. h. Pa as the CNF percentage increased from 0 to 30%. Also the presence of cellulose nanofibers improved moisture sorption of polyvinyl alcohol. The weight loss of PVA films increased 60% with addition of 30wt% CNF after 90 days of exposure in soil}, keywords = {Poly (vinyl alcohol),Cellulose Nanofibers,Freeze drying,Mechanical properties,Biodegradability}, title_fa = {بررسی خواص زیست تخریب پذیری و مکانیکی پلی وینیل الکل تقویت شده با نانو الیاف سلولزی}, abstract_fa = {هدف از این مطالعه، تقویت خواص پلی وینیل الکل با استفاده از نانو الیاف سلولزی می‌باشد. به منظور بهبود سازگاری و قابلیت اختلاط نانو الیاف سلولزی با پلیمر، از روش خشک کردن انجمادی استفاده شد. فیلم‌های نانو چندسازه برپایه پلی وینیل الکل با مقادیر 5، 10، 20 و 30 درصد وزنی نانو الیاف سلولزی با استفاده از فریز درایر تهیه شدند و اثرات نانو الیاف سلولزی بر خصوصیات مکانیکی، دینامیکی-مکانیکی، جذب آب، بازندارگی و زیست تخریب‌پذیری نانو چند سازه‌ها مورد بررسی قرار گرفت. استحکام کششی و مدول الاستیسیته فیلم PVA به طور قابل توجهی با افزودن نانو الیاف سلولزی بهبود یافت. در این رابطه نانو چندسازه تهیه شده از 10 درصد نانو الیاف سلولزی، دارای بیشترین مقاومت کششی و مدول الاستیسیته بودند. همچنین نتایج نشان داد، مدول ذخیره نانو چندسازه‌ها با افزودن نانو الیاف سلولزی به درون ماتریس پلیمری به طور قابل ملاحظه ای بهبود یافت. با افزایش مقدار نانو الیاف سلولزی از صفر به 30 درصد نفوذپذیری به بخارآب از 31/7 به g/m.h.pa×107-×1/2 کاهش یافت. همچنین حضور نانو الیاف سلولزی موجب بهبود خاصیت جذب آب پلی وینیل الکل شد. کاهش وزن فیلم‌های پلی وینیل الکل با افزودن 30 درصد نانو الیاف سلولزی پس از 90 روز قرار گرفتن در محیط خاک 60 درصد افزایش یافت.}, keywords_fa = {پلی وینیل الکل,نانو الیاف سلولزی,خشک کردن انجمادی,ویزگیهای مکانیکی,زیست تخریب پذیری}, url = {https://www.ijwp.ir/article_23243.html}, eprint = {https://www.ijwp.ir/article_23243_3a1f4d655c586ba85fddfba7528438e0.pdf} } @article { author = {Gholamiyan, Hadi and tarmian, asghar and pourtahmasi, kambiz}, title = {Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {509-520}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the effects of poplar wood surface modification using sol-gel method on the quality of alkyd and polyurethane coatings for outdoor application were studied. For this purpose, the wood surface was modified with Tetraethoxy‌silane (T) sol-gel material. Then, solvent-borne alkyd (AS) and solvent-borne polyurethane (PS) coatings were applied. The quality of coatings was evaluated by microscopic observation using fluorescence, confocal laser scanning microscopy (CLSM) and EDX-SEM. The results of EDX showed a noticeable silicon peak in the sol-gel-treated specimens. The results of fluorescence microscopic studies showed that alkyd and polyurethane coatings only present in the cell lumens but the sol-gel penetrates into the cell walls. Laser microscope results showed that the modification of wood surface with sol-gel process reduces the roughness of alkyd and polyurethane coatings caused by weathering.}, keywords = {Coating,Sol-gel,alkyd,Polyurethane,Weathering}, title_fa = {بررسی میکروسکوپی اثرات اصلاح سطح چوب با فرایند سل‌ژل بر کیفیت پوشش‌دهی آن با پوشش‌های آلکیدی و پلی‌اورتان}, abstract_fa = {در این تحقیق با استفاده از مطالعات میکروسکوپی اثرات اصلاح سطح چوب صنوبر با فرایند سل‌ژل بر کیفیت پوشش‌دهی آن با پوشش های آلکیدی و پلی‌اورتان برای کاربرد در فضای باز بررسی شد. برای این منظور از پوشش سل‌ژل تترا اتوکسی سیلان استفاده شد و پس از خشک شدن آن، پوشش‌های آلکیدی و پلی‌اورتان با دستگاه فیلم‌کش اعمال شد. کیفیت پوشش‌دهی با استفاده از میکروسکوپ‌های فلوئورسنت، لیزری (CLSM)، الکترونی SEM) (EDX- مورد بررسی قرار گرفت. نتایج مطالعات EDX حاکی از حضور گروه‌های سیلانی در نمونه اصلاح شده با فرایند سل‌ژل بود. نتایج مطالعات میکروسکوپی فلوئورسنت نشان داد که بر خلاف پوشش‌های آلکیدی و پلی‌اورتان که فقط حفرات سلولی را پر کرده بودند، پوشش‌ سل‌ژل بیشتر در دیوار‌های سلولی نفوذ کرده است. مطالعات میکروسکوپ لیزری نشان داد که در اثر آمایش سطح چوب با فرایند سل‌ژل از میزان زبری پوشش‌های آلکیدی و پلی‌اورتان در اثر هوازدگی کاسته می‌شود.}, keywords_fa = {پوشش دهی,آلکیدی,پلی اورتان,سل ژل,هوازدگی}, url = {https://www.ijwp.ir/article_24426.html}, eprint = {https://www.ijwp.ir/article_24426_266f29e432ed78d78338ad2f56e8c76e.pdf} } @article { author = {rashedi, kambiz}, title = {Investigation on bending moment capacity of corner joints constructed with spline under diagonal tension and compression}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {521-532}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This study was conducted to evaluate the effects of the penetration depths (8, 11, 14) and material types of spline (high density fiber board (HDF), plywood and hornbeam wood (Carpinus betulus)) composite material types (MDF and particleboard) on bending moment resistance of mitered L-type joints. In this research L-type joints fabricated with spline and PVA adhesive with dimensions 160 × 230 ×16 mm (Length × Width × Thickness respectively). Joints were fabricated tested by an Instron machine under tension and compression loading. The results have shown that the bending moment resistance of joints under compression was higher than those under tension. The lowest bending moment resistance under tension was seen in particleboard and plywood spline with 14 mm penetration depth while under compression it was seen in particleboard, and HDF spline with 11 mm penetration depth. The highest bending moment resistance under tension was seen in MDF, and plywood spline with 14 mm penetration depth while under compression it was seen in MDF, and HDF spline with 8 mm penetration depth.}, keywords = {L-type joints,bending moment resistance,spline,Particleboard,MDF}, title_fa = {بررسی ظرفیت لنگر خمشی اتصال گوشه‌ای فارسی ساخته شده با قلیف در تخته خرده چوب و تخته فیبر نیمه سنگین (MDF)}, abstract_fa = {این مطالعه با هدف بررسی تاثیر عمق نفوذ (8، 11 و 14( میلیمتر و جنس قلیف (تخته فیبر سنگین (HDF)، تخته لایه و چوب ممرز (Carpinus betulus) بر ظرفیت لنگر خمشی اتصال‌های گوشه ای فارسی L) شکل) ساخته شده از تخته خرده چوب و MDF انجام شد. در این پژوهش اتصال‌های L شکل با ابعاد 16 × 230 × 160میلیمتر (به ترتیب طول × پهنا × ضخامت) و اتصال دهنده قلیف با چسب پلی وینیل استات ساخته شدند. اتصال‌های ساخته شده با وسیله دستگاه اینسترون در حالت بارگذاری کششی و فشاری مورد آزمون قرار گرفتند. نتایج نشان دادند که ظرفیت لنگر خمشی در حالت بارگذاری فشاری بیشتر از کششی است. کمترین ظرفیت لنگر خمشی در حالت بارگذاری کششی مربوط به اتصال ساخته شده از تخته خرده چوب با قلیف از جنس تخته لایه و عمق نفوذ 14میلیمتر بوده و بیشترین آن مربوط به اتصال ساخته شده از MDF با قلیف از جنس تخته لایه و عمق نفوذ 14میلیمتر بود. در حالت بارگذاری فشاری کمترین ظرفیت لنگر خمشی مربوط به اتصال ساخته شده از تخته خرده چوب با قلیف از جنس چوب و عمق نفوذ 11میلیمتر بوده و بیشترین آن مربوط به اتصال ساخته شده از MDF با قلیف از جنس HDF و عمق نفوذ 8 میلیمتر بود.}, keywords_fa = {اتصال گوشه ای,ظرفیت لنگر خمشی,قلیف,تخته خرده چوب,MDF}, url = {https://www.ijwp.ir/article_24487.html}, eprint = {https://www.ijwp.ir/article_24487_000a73b948dad71ea824ec7ec5e4d4ec.pdf} } @article { author = {Khayati Nezhad, saeedeh and hosseinzadeh, omid and Hajjarian, Marzieh and Abdi, mohammadReza}, title = {Strategic planning for wood farming development (Case study: Urmia)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {533-548}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Wood farming is one of the strategies of agricultural development programs to reform unsustainable exploitation of natural resources. Poplar is one of the known species for wood farming in the country. This species is fast-growing and has numerous Colognes has the ability to adapt to different climatic conditions. Fast growth, good economic returns and traditional agricultural knowledge, favorable habitat to agriculture are advantages of poplar for agricultural development. However, the result of previous studies indicates existing barriers to the development of plantation and its development need strategic planning. What seem essential today are strategies to overcome these obstacles. Accordingly, this present study with a holistic view trying to identify the strengths, weaknesses, opportunities and threats of poplar farming. And the most appropriate strategies for the development of poplar farming in Urmia have offered. This research was a Field study and conducted using questionnaires. In this study, strategies were defined using SWOT analysis and the strategies were prioritized using analysis network process. The results showed the history of poplar farming in this region is the most important benefit to development and the many uses for poplar wood is the next priority. Increasingly replacement of poplar farming with alternative cultures is one of the main weaknesses of poplar farming development in this region. After that long return of profitability in poplar farming is the second priority. The most important opportunities for the development were the development of credit specialists to support of poplar farming and the most important threat was lack of annual financing of farmers. Also the results of strategic prioritization showed, Modern irrigation methods to reduce water consumption and planning to teach correct principles of technical planting, farming and harvesting are considered as the most important strategies.}, keywords = {ANP,Poplar farming,SWOT,Urmia}, title_fa = {تصمیم‌گیری راهبردی در زمینه توسعه تولید چوب صنوبر به کمک روش SWOT-ANP (مطالعه موردی: شهرستان ارومیه)}, abstract_fa = {زراعت چوب یکی از راهبردهای برنامه‌های توسعه کشور برای اصلاح نظام بهره‌برداری از منابع طبیعی است. صنوبر یکی از گونه-های شناخته شده برای زراعت چوب در کشور به‌شمار می‌رود. این گونه از گونه‌های تندرشد به‌شمار می‌آید و دارای کلن‌های متعددی است که توانایی سازگاری با شرایط اقلیمی مختلفی را دارد. سرعت رشد بالا، بازدهی اقتصادی مناسب و آشنایی سنتی کشاورزان با زراعت صنوبر و وجود رویشگاه‌های مناسب در کشور از مزیت‌های توسعه زراعت صنوبر است. با این حال نتایج تحقیقات گذشته بیان‌گر موانع متعدد موجود بر سر راه توسعه طرح‌های صنوبرکاری و لزوم برنامه‌ریزی راهبردی برای توسعه آن است. آنچه که امروزه ضروری به‌-نظر می‌رسد یافتن راهبردهایی برای برداشتن این موانع است. بر همین اساس، تحقیق حاضر با دیدی جامع‌نگر سعی بر شناسایی نقاط قوت، ضعف، فرصت‌ها و تهدیدهای صنوبرکاری دارد و مناسب‌ترین راهبردها برای توسعه زراعت چوب در شهرستان ارومیه را ارائه کرده است. این تحقیق به صورت میدانی و با استفاده از پرسش‌نامه انجام شده است. در این مطالعه برای تعریف راهبردها از تحلیل سوآت و برای الویت‌بندی راهبردها از روش تحلیل شبکه‌ای استفاده شد. نتایج نشان داد سابقه زراعت صنوبر در منطقه به‌عنوان مهم‌ترین نقطه قوت در زمینه توسعه مطرح است و کاربردهای فراوان چوب صنوبر در الویت بعدی پس از آن قرار دارد. جایگزین شدن روزافزون کشت صنوبر با کشت‌های جایگزین یکی از نقاط ضعف اصلی توسعه چوب صنوبر در منطقه است. پس از آن دیربازده بودن سودآوری زراعت صنوبر در الویت دوم قرار دارد. مهمترین فرصت پیش روی توسعه، از نظر متخصصین ایجاد نظام‌های اعتباری جهت حمایت از توسعه بوده و مهمترین تهدید پیش روی توسعه عدم تامین مخارج زارعین به‌صورت سالیانه است. همچنین نتایج الویت‌بندی راهبردها نشان داد، روش‌های نوین آبیاری با هدف کاهش مصرف آب و برنامه‌ریزی برای آموزش اصول صحیح و فنی مراحل کاشت، داشت و برداشت به‌عنوان مهمترین راهبردها مطرح هستند.}, keywords_fa = {تحلیل شبکه ای,زراعت صنوبر,سوآت,ارومیه}, url = {https://www.ijwp.ir/article_24940.html}, eprint = {https://www.ijwp.ir/article_24940_8972624374801c0d4276a0e1d7697d3c.pdf} } @article { author = {dalvand, mossayeb and pourtahmasi, kambiz and ebrahimi, ghanbar}, title = {Investigation of the relations between screw diameter and pilot hole diameter with withdrawal resistance in LVL for establishing regression model}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {549-561}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, variation in screw diameter and corresponding pilot hole, and relationship between these variables with withdrawal resistance for establishing multiple linear regression model was investigated. In this investigation 9-ply LVL was made of poplar (Populus deltoids). LVL was produced with polyvinyl acetate adhesive. Test specimens were prepared from LVL produced with dimensions of 7.5 * 7.5 cm. Dimension of pilot hole embedded in specimens at 4 levels (50, 60, 70 and 80 present of nominal screw diameter). The test Specimens were studied with nominal screw diameter 4.2, 5, 6 and 7mm were produced. Withdrawal resistance of screw was tested from surface and, edge and cross-sections. Results have shown that withdrawal resistance from edge (perpendicular to grain) was more than withdrawal resistance from face and cross-section (parallel to grain). Also the results have shown that withdrawal resistance of different screw diameter decreased with increase of pilot hole diameter, but withdrawal resistance increased with increase of screw diameter itself. The highest withdrawal resistance was obtained from screw 7 mm in diameters and predrilled hole diameter 50% of screw diameter. The lowest withdrawal resistance was observed from screw 4.2 mm in diameter and predrilled hole diameter 80% of screw diameter. Finally multiple linear regression models ys= 3.055+.411X1-3.358X2, ye║=2.6361.694X1+.089X2 and ye┴= 2.334+.509X1-2.901X2 were obtained to predict of withdrawal resistance for face, cross-section and edge respectively.}, keywords = {Screw withdrawal resistance,Screw diameter,pilot hole,Regression model}, title_fa = {بررسی ارتباط بین شاخص‌های قطر پیچ و سوراخ پیش ساخته با توان نگه داری آن در چوب چندسازۀ لایه‌ای (LVL) برای تدوین مدل رگرسیونی}, abstract_fa = {در این پژوهش شاخص‌های پیچ، قطر سوراخ پیش ساخته آن و ارتباط بین این شاخص‌ها با توان نگه‌داری پیچ در مقاطع عرضی و طولی و سطح پنل‌های چندسازه‌ای لایه‌ای (LVL) برای دستیابی به مدلی رگرسیون خطی چند متغیره مورد بررسی قرار گرفته است. در این بررسی تخته‌های LVL آزمونی 9 لایه از گونه صنوبر دلتوئیدس (Populus deltoides) تولید شدند. برای ساخت LVL از چسب پلی وینیل استات استفاده شد. نمونه‌های آزمونی به ابعاد 5/7 × 5/7 سانتی‌متر از LVLهای ساخته شده تهیه شدند. سوراخ‌های پیش ساخته نمونه‌های آزمونی در چهار سطح 50، 60، 70 و 80 درصد قطر پیچ تعبیه شد. نمونه‌های آزمونی مورد مطالعۀ با پیچ‌های پانلی‌ به قطر اسمی 2/4، 5، 6 و 7 میلی‌متر ساخته شدند. توان نگه‌داری پیچ در جهت عمود بر سطح و مقاطع عرضی و طولی مورد آزمون قرار گرفت. نتایج نشان دادند که توان نگه‌داری مقطع طولی نسبت به توان‌نگه‌داری عمود بر سطح و مقطع عرضی بیشتر بوده است. همچنین نتایج نشان دادند که با افزایش قطر سوراخ پیش ساخته توان نگه‌داری پیچ در همه قطرها کاهش می‌یابد. ولی با افزایش قطر پیچ توان نگه‌داری پیچ افزایش داشته است. بیشترین توان نگه‌داری را پیچ پانلی به قطر 7 میلی‌متر و سوراخ پیش ساخته با 50 درصد قطر پیچ در LVL داشته است. کمترین توان نگه‌داری با همین پیچ به قطر 2/4 میلی‌متر و سوراخ پیش ساخته 80 درصد قطر پیچ مشاهده شده است. در نهایت معادله رگرسیون خطی X2 358/3-X1411/0+055/3 = ys، X2 358/3-X1411/0+055/3 = ye║و X2 358/3-X1411/0+055/3 = ye┴ به ترتیب برای توان‌نگه‌داری عمود بر سطح، مقطع طولی و مقطع عرضی LVL به عنوان مدل پیش بینی توان نگه‌داری پیچ در LVL ارائه شده است.}, keywords_fa = {توان نگه‌داری پیچ,قطر پیچ,سوراخ پیش ساخته,مدل رگرسیونی}, url = {https://www.ijwp.ir/article_25019.html}, eprint = {https://www.ijwp.ir/article_25019_972c2021a53e8b556671e533b2c15813.pdf} } @article { author = {miri, seyedmahmoud and tarmian, asghar and Azadfallah, Mohammad Azadfallah and Abdolkhani, Ali and Efhami Sissi, Davod}, title = {Microencapsulation of Zataria multiflora thyme essential oil to improve its antifungal efficiency by controlled release mechanism}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {563-571}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The purpose of the present research is enhancing the thyme essential oil efficacy by microencapsulation technique with emphasis on controlled released mechanism. First, essential oil was extracted by hydro-distillation in a Clevenger-type apparatus for 4 h. Then, core-shell microcapsules were prepared using solvent evaporation method with oil in water emulsion system. To measure the efficacy of encapsulated thyme oil, UV-visible spectrometer was used and was found to be 67 percent. The size and shape of oil droplets in emulsion were observed with optical microscope and the morphology of the polymer capsules was observed with scanning electron microscope. Release kinetics in both free and encapsulated forms showed that all components of free oil evaporated into atmosphere, while just 6 percent of capsules evaporated in the same condition. So, microencapsulation method increased the efficacy of the essential oil with controlled release mechanism. Filter paper disk test was performed to investigate the fungicide effects of thyme oil in both free and capsulated forms before and after leaching test. Results revealed that there are no significant differences between control samples and those treated by free oil especially after leaching test. In contrast, the samples treated by microencapsulated thyme oil showed much more resistance against Aspergillusniger mold indicating that the controlled release mechanism can prevent mold growth on filter paper disk and therefore improved the oil efficacy.}, keywords = {Aspergillus mold,Controlled release,essential oil,Microencapsulation,Poly (methyl methacrylate)}, title_fa = {افزایش کارائی ضد قارچی اسانس آویشن شیرازی با رهایش کنترل شده آن به روش میکروکپسوله کردن}, abstract_fa = {هدف از این تحقیق استفاده از روش میکروکپسوله‌کردن یا ریزپوشانی برای حفظ ترکیبات فرار اسانس‌ آویشن و افزایش اثربخشی خصوصیات ضدقارچی آن با مکانیسم رهاسازی کنترل شده طی زمان بود. برای این منظور، در ابتدا با استفاده از دستگاه کلونجر اسانس آویشن تهیه و سپس با استفاده از روش تبخیر حلال و تشکیل امولسیون روغن در آب، کپسول‌های هسته- پوسته تشکیل شدند که دارای هسته روغنی و پوسته پلیمری از جنس پلی متیل متاکریلات بودند. بازدهی میزان کپسوله‌شدن مواد با روش طیف‌سنجی مرئی- فرابنفش اندازه‌گیری شد و میزان بازدهی کپسول‌ها 68 درصد تعیین شد. همچنین اندازه و شکل کپسول‌های تولید شده با کمک میکروسکوپ نوری و مرفولوژی آن‌ها توسطمیکروسکوپ الکترونی روبشی بررسی شد. نتایج سینتیک رهایش ترکیبات فرار آویشن در حالت معمولی و کپسوله‌شده نشان داد که در مدت زمانی که همه ترکیبات اسانس آویشن تبخیر می‌شوند، تنها 6 درصد آویشن کپسوله شده تبخیر شده و وارد محیط می‌شود. همچنین برای بررسی میزان اثربخشی اسانس آویشن در دو حالت معمولی و کپسوله‌شده قبل و پس از آبشویی، از کپک آسپرژیلوس نایجر با روش آزمون کاغذ صافی استفاده شد. نتایج نشان داد تفاوت چندانی بین خصوصیات مانع‌شوندگی اسانس آویشن در حالت معمولی با نمونه شاهد وجود ندارد و سرعت تبخیر بالای ترکیبات موثره آویشن از اثربخشی آن می‌کاهد. در مقابل، نقش بارز میکروکپسوله‌کردن پس از آبشویی مشخص شد وکارائی بالای اسانس آویشن کپسوله‌شده در برابر رویش کپک حاکی از قابلیت بالای این روش در حفظ ترکیبات ضدمیکروبی اسانس آویشن بود.}, keywords_fa = {اسانس آویشن,پلی متیل متاکریلات,رهایش کنترل‌شده,کپک آسپرژیلوس,میکروکپسوله‌کردن}, url = {https://www.ijwp.ir/article_25657.html}, eprint = {https://www.ijwp.ir/article_25657_0d98fc24aa0baeac3a2680a8395d5f80.pdf} } @article { author = {Asadizadeh, Yaghob and azizi, majid and Hamzeh, Yahya}, title = {Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {573-584}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Cleaner production process is an environmentally friendly approach that attempts to reduce waste and energy consumption then reduce environmental pollutions of industrial processes to provide the possibility of sustainable production in industrial units. To achieve this goal and alignment with cleaner production strategies, paper industries should consider reducing wastes of production processes and irregular consumption of energy as a priority in their programs. In this research Analytic Hierarchy Process has been applied and a three level hierarchy model was structured to facilitate the cleaner production process in Latif paper products firm. Using a literature review and field study, the proposed model provided a framework for cleaner production implementation in the firm. Results showed priorities of the main criteria of cleaner production are process change, product modification, implementation of preventive maintenance system, resititution and man force capitals respectively. Process change criterion allocated 40 percent of the total weighing value and has the highest priority in implementation of cleaner production strategy. Existence of industrial automation and its technology level which is a sub criterion of process change has the highest priority among 31 sub criteria. Also some of higher priority sub criteria such as use of higher quality inclusion and implementation of calibration system are related to process change. Therefore, to achieve cleaner production goals and implementation of its strategic objectives it is necessary to pay more attention to this criterion. Inconsistency ratio of the research is 0.06 which indicates the results are compatible. The results of this research can be used to accelerate the implementation of cleaner production process in Iran’s pulp and paper industry.}, keywords = {Cleaner production,Paper industries,analytic hierarchy process,Sustainable production,Criteria and Sub criteria}, title_fa = {شناسایی و اولویت بندی شاخص های تولید پاک تر با استفاده از فرایند تحلیل سلسله مراتبی( مطالعه موردی: شرکت محصولات کاغذی لطیف)}, abstract_fa = {فرایند تولید پاک تر ، یک رویکرد دوستدار محیط زیست محسوب می شود که سعی دارد با کاهش ضایعات و مصرف انر‍‍ژی و .. آلودگی های زیست محیطی فرایندهای صنعتی راکاهش دهد تا امکان تولید پایدار را در واحدهای صنعتی فراهم نماید. برای نیل به این هدف صنایع کاغذسازی نیز باید کاهش ضایعات فرایندهای تولید و مصرف بی رویه انرژی را در همسویی با استرات‍ژی های تولید پاک تر در اولویت برنامه های خود قرار دهند. در این تحقیق فرایند تحلیل سلسله مراتبی بکار گرفته شده و یک سلسله مراتب با سه سطح برای تسهیل فرایند اولویت بندی تولید پاکتر در کارخانه کاغذ لطیف ساختار دهی شده است. با مرور ادبیات و مطالعات میدانی مدل پیشنهادی، برای پیاده سازی تولید پاکتر در کارخانه فراهم گردید. نتایج تحقیق نشان داد شاخص های اصلی تولید پاک تر به ترتیب اولویت تغییر فرایند، اصلاح محصول، اجرای نظام تعمیر و نگهداری پیشگیرانه ، بازگردانی و سرمایه های انسانی می باشند. شاخص تغییر فرایند با اختصاص میزان 40 درصد از کل اهمیت بالاترین اولویت را در اجرای راهبردی تولید پاک تر به خود اختصاص داد. زیرشاخص وجود اتوماسیون صنعتی و سطح تکنولوژی آن که از زیرشاخص های تغییر فرایند میباشد بالاترین اولویت را در بین 31 زیرشاخص دارد. همچنین زیر شاخص های با اولویت بالاتر مانند استفاده از آخال با کیفیت و اجرای نظام کالیبراسیون نیز به شاخص تغییر فرایند ارتباط دارند. لذا برای دستیابی به اهداف تولید پاک تر و اجرای راهبردی آن توجه بیشتر به این شاخص لازم است . نرخ ناسازگاری کلی در این بررسی 06/0 می باشد که دلالت بر ثبات نتایج بدست آمده دارد. نتایج این تحقیق می تواند در تسریع اجرای فرایند تولید پاک تر در صنعت خمیر و کاغذ ایران مورد استفاده قرار گیرد.}, keywords_fa = {تولید پاک تر,صنایع کاغذ سازی,فرایند تحلیل سلسله مراتبی,تولید پایدار,شاخص و زیرشاخص}, url = {https://www.ijwp.ir/article_25676.html}, eprint = {https://www.ijwp.ir/article_25676_a1cffc75686e7c886ab66b30273c4bd4.pdf} } @article { author = {Ismaeilimoghadam, Saeed and Jafari Samimi2, mojtaba and Seyedzadeh Otaghsaraei, seyaemojtaba and razavi, mohammad and Seyedzadeh Otaghsaraei, seyadreza}, title = {Construction of lightweight and resistant concrete with silica and wooden particles}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {585-603}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This research is aimed to investigate the possibility of making resistant Light concrete and the effects of different levels of wood and silica particles on physical, mechanical and morphology was performed. Granulation wood particles to 5 levels, 0, 5, 10, 15 and 20% and silica particles in a scale of nanometers and micrometers to 4 levels, 0, 3, 6 and 9% based on dry weight of cement were the variables of this research. Mixing process was is done manually and cement paste produced into a square molds were cast. To amass gel of cement was used from the vibrating table. After making concrete physical properties including water absorption, moisture diffusion coefficient and density in accordance with ASTM standard and mechanical properties including compressive strength and compressive strength index accordance with the regulations for concrete Iran (ABA) was performed. Infrared spectroscopy to evaluate the impact of silica particles were made of concrete. Scanning electron microscope to study the morphology of concrete were used. The results showed that by increasing the amount of wood, density, compressive strength and compressive strength index decreased while water absorption and moisture diffusion coefficient increased. Silica increases to 3 percent, increased compressive strength and compressive strength index and addition of more silica have a negative impact on the properties. Water absorption of samples by adding silica to 3 percent decreased and then increased. Density of samples increased with increasing silica. With increasing of silica to 3 percent, moisture diffusion coefficient was decreased but then the moisture diffusion coefficient increased with increasing silica. Infrared spectroscopy showed that addition of silica peak was reduced to a hydroxyl group. The results of scanning electron microscope showed good distribution of silica particles on the surface of 3 percent.}, keywords = {Lightweight concrete,Nano silica,Compressive strength,Scanning electron microscopy}, title_fa = {ساخت بتن سبک و مقاوم با استفاده از ذرات چوب و سیلیس}, abstract_fa = {این تحقیق با هدف بررسی امکان ساخت بتن سبک و مقاوم و تاثیر درصدهای مختلف ذرات چوب و سیلیس بر خواص فیزیکی، مکانیکی و ریخت‌شناسی آن‌ها انجام شد. ذرات چوب به صورت دانه‌بندی و در 5 سطح صفر، 5، 10، 15 و 20 درصد و ذرات سیلیس در مقیاس نانومتری و میکرومتری در 4 سطح صفر، 3، 6 و 9 درصد بر مبنای وزن خشک سیمان متغیرهای این تحقیق بودند. فرآیند اختلاط مواد به صورت دستی انجام شد و خمیر سیمان تولید شده به درون قالب‌های مکعبی شکل با اضلاع 5 سانتی‌متر ریخته شد. جهت متراکم کردن ژل سیمان از میز ویبره استفاده شد. بعد از ساخت بتن‌ها خواص فیزیکی شامل جذب آب، ضریب انتشار رطوبت و دانسیته مطابق با استاندارد ASTM و خواص مکانیکی شامل مقاومت فشاری و شاخص مقاومت فشاری مطابق با آیین‌نامه بتن ایران (آبا) انجام شد. طیف‌سنجی مادون قرمز جهت بررسی تاثیر ذرات سیلیس بر بتن‌های ساخته شده انجام شد. میکروسکوپ الکترونی پویشی جهت مطالعه رفتار ریخت‌شناسی بتن‌ها مورد استفاده قرار گرفت. نتایج نشان داد که با افزایش چوب، دانسیته، مقاومت فشاری و شاخص مقاومت فشاری کاهش یافت در حالی که جذب آب و ضریب انتشار رطوبت نمونه‌ها افزایش یافت. با افزایش سیلیس تا 3 درصد، مقاومت فشاری و شاخص مقاومت فشاری افزایش یافت و افزودن مقادیر بیشتر سیلیس تاثیر منفی بر روی این خواص داشت. جذب آب نمونه‌ها با افزودن سیلیس تا 3 درصد کاهش و پس از آن افزایش یافت. دانسیته نمونه‌ها با افزایش سیلیس افزایش یافت. با افزایش سیلیس تا 3 درصد ضریب انتشار رطوبت کاهش یافت اما پس از آن و با افزایش بیشتر سیلیس ضریب انتشار رطوبت افزایش یافت. طیف‌سنجی مادون قرمز نشان داد که در اثر افزودن سیلیس پیک مربوط به گروه هیدروکسیل کاهش یافت. نتایج میکروسکوپ الکترونی پویشی حاکی از پراکنش مناسب ذرات سیلیس در سطح 3 درصد بود.}, keywords_fa = {بتن سبک,نانو سیلیس,مقاومت فشاری,میکروسکوپ الکترونی پویشی}, url = {https://www.ijwp.ir/article_25783.html}, eprint = {https://www.ijwp.ir/article_25783_ab9f66eed163320592752cbe8d6e2f43.pdf} } @article { author = {vaziri, vahid and Mesgarhaye Kashani, Mohammad Hasan}, title = {The effect of alkali treatment of bamboo on the physical and mechanical properties of particleboard made from bamboo - industrial wood particles}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {605-615}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, physical and mechanical properties of single layer particleboard made from bamboo powder (with and without alkali treatment) and wood particles were investigated. Bamboo powder (30 mesh particles) was treated with 5% hydroxide sodium for 120 minutes. Industrial wood chips from Sanate Choube Shomal Company were used.The variable in this research were the ratio of bamboo powder (with and without alkali treatment) to wood chips (at four levels; 0:100, 10:90, 20:80, 30:70). Urea formaldehyde resin used at 10 percent level of dry weight of raw material as well as ammonium chloride was used as a catalyst at 2 percent level of the dry weight of adhesive. Physical and mechanical properties of panels measured according to EN Standard. Mechanical properties of the particleboards made from treated bamboo was superior to the relevant untreated bamboo. Water absorption and thickness swelling after 2 and 24 hours immersion in water decreased with alkali treatment. Mercerization, or treating cellulose fibers in alkaline solution, because of fibrillation, the removal of lignin and hemicellulose enhances the mechanical properties and dimension stability of the particleboard by promoting resin-fiber mechanical interlocking at the interface. Results showed, there was usability of the treated bamboo up to 30 percent for general purpose boards for use in dry conditions.}, keywords = {Particleboard,Alkali treatment,Bamboo,Fibrillation,Physical and mechanical properties}, title_fa = {تأثیر تیمار قلیایی بامبو بر ویژگی های فیزیکی و مکانیکی تخته خرده چوب حاصل از بامبو - خرده چوب صنعتی}, abstract_fa = {در این تحقیق، خواص فیزیکی و مکانیکی تخته خرده چوب همسان ساخته شده با پودر بامبو (با و بدون تیمار قلیایی) و ذرات خرده چوب مورد بررسی قرار گرفت. بدین منظور پودر بامبو (30 مش) با هیدروکسید سدیم 5 درصد به مدت 120 دقیقه تیمار گردید. خرده‌چوب صنعتی از شرکت صنعت چوب شمال تهیه شد. نسبت وزنی پودر بامبو (با و بدون تیمار قلیایی) به خرده چوب در چهار سطح (100/0، 90/10، 80/20، 70/30) به عنوان متغیرهای مستقل این مطالعه انتخاب گردید. از رزین اوره فرم آلدهید به میزان 10 درصد وزن خشک ماده اولیه و از کلرید آمونیوم به عنوان هاردنر به میزان 2 درصد وزن خشک رزین استفاده شد. برای انجام آزمون‌های فیزیکی و مکانیکی از استانداردهای EN استفاده شد. نتایج خواص مکانیکی تخته‌های ساخته شده از بامبو تیمار شده به طور معنی‌داری بیشتر از نمونه‌های ساخته شده از بامبو تیمار نشده بود. در اثر تیمار قلیایی میزان جذب آب و واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه‌وری در آب کاهش یافت. مرسریزاسیون یا تیمار الیاف سلولزی در محلول قلیایی به خاطر عمل لیفچه‌ای شدن، حذف لیگنین و همی سلولز باعث بهبود اتصال بین ذرات و رزین شده و در نتیجه باعث بهبود خواص مکانیکی و پایداری ابعاد تخته خرده چوب شد. نتایج نشان داد، قابلیت به کارگیری بامبوی تیمار شده تا 30 درصد برای تخته‌های با اهداف عمومی (نجاری) به منظور استفاده در شرایط خشک وجود دارد.}, keywords_fa = {تخته خرده چوب,تیمار قلیایی,بامبو,لیفچه ای شدن,خواص فیزیکی و مکانیکی}, url = {https://www.ijwp.ir/article_25984.html}, eprint = {https://www.ijwp.ir/article_25984_9363ee9491ca2b605a6ed17f121e3b18.pdf} } @article { author = {Esmaeeli, neda and ghorbani, maryam and Beparva, pouriya}, title = {Investigation on the physical properties of poplar wood (Populus deltoids) modified with glutaraldehyde/paraffin}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {617-630}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Current research was conducted to investigate the effect of combined modification of glutaraldehyde/paraffin on the physical properties of poplar wood. Impregnation was done in three concentration levels of glutaraldehyde, 5, 10 and 20% containing MgCl2 as catalysts, and consequently with paraffin in combined modified samples using vacuum-pressure method. According to the FTIR results, reaction of Glutaraldehyde with wood polymers resulted in increase the methylene groups and reduce the hydroxyl groups. Bifurcation of hydroxyl groups peak with increase of glutaraldehyde concentration from 10 to 20%, confirmed the hemiacetal formation that hydrolyzed faster than the acetal during soaking, so led to more weight loss. Glutaraldehyde modification was decreased water entrance into the wood structure via blocking of hydroxyl groups and cell wall bulking, and reduced the flexibility of wood for swelling due to crosslinking. Also, Paraffin by reducing the capillary effect, declined the penetration of water into the wood. Paraffin infixation in wood caused more weight loss of combined modification levels with increase of the immersion time.}, keywords = {Paraffin,Water uptake,Glutaraldehyde,swelling,FTIR}, title_fa = {بررسی ویژگی‌های فیزیکی چوب صنوبر (Populus deltoides) اصلاح شده با گلوتارآلدئید/پارافین}, abstract_fa = {در پژوهش حاضر اثر اصلاح ترکیبی گلوتارآلدئید/پارافین بر خواص فیزیکی چوب صنوبر بررسی شد. اصلاح با گلوتارآلدئید در 3 غلظت 5، 10 و 20 درصد در حضور کاتالیزور کلرید‌منیزیم و متعاقباً، اشباع نمونه‌های اصلاح ترکیبی با پارافین به‌روش خلا-فشار انجام ‌شد. بر‌اساس نتایج طیف‌سنجی، واکنش گلوتارآلدئید با پلیمر‌های چوب به افزایش گروه‌های متیلنی و کاهش گروه‌های هیدروکسیل انجامید. دو شاخه‌شدن پیک گروه هیدروکسیل با افزایش غلظت گلوتارآلدئید از 10 به 20درصد، موید تشکیل همی-استال بود که طی آزمون دوره‌ای غوطه‌وری- خشک‌کردن، سریع‌تر از استال هیدرولیز و به کاهش وزن بیشتر منتهی‌شد. اصلاح گلوتارآلدئید با مسدود کردن گروه‌های هیدروکسیل و حجیم‌شدگی دیواره سلولی، موجب کاهش ورود آب به داخل چوب، و با برقراری پیوند عرضی موجب کاهش انعطاف‌پذیری چوب جهت واکشیدگی شد. پارافین نیز با کاهش اثر موئینگی، نفوذ آب به‌داخل چوب را تقلیل بخشید. عدم تثبیت پارافین در چوب و خروج آن، موجب افت‌وزن سطوح اصلاح ترکیبی با افزایش زمان غوطه‌وری گردید.}, keywords_fa = {واژه‌های کلیدی: گلوتارآلدئید,پارافین,جذب آب,واکشیدگی,طیف‌سنجی مادون قرمز}, url = {https://www.ijwp.ir/article_26712.html}, eprint = {https://www.ijwp.ir/article_26712_dc41e23a3e7d4f46201f82d3f0b14ed6.pdf} } @article { author = {Barzegar, Mahsa and Behrooz, Rabi and Mansouri, Hamidreza and Kazemi Najafi, Saeed}, title = {Performance Evaluation of Modified Canola Flour Adhesive in Plywood Production}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {631-643}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The purpose of this study was to evaluate the performance of canola flour adhesive in plywood manufacturing. For this reason, first canola flour was modified with sodium hydroxide and urea/sodium hydroxide, separately. Then to create cross linking between protein molecules, different levels of pMDI (5, 15, and 30%) was added to slurry as based on dry weight of canola flour. The results of this study indicated that the dry shear strength of specimens was significantly increased compared to unmodified adhesive as the alkali and urea was added to canola flour adhesive. Also, more pMDI content in adhesives resulted more improvement this property. In this study, the dry shear strength of all modified canola adhesives was more than the En-314-2 standard. Also, chemical modification of canola adhesives caused improvement the water resistance so that in soaking/drying cycles, the behavior of some adhesives was close or similar to Urea formaldehyde.}, keywords = {"Canola flour adhesive","Shear strength","Water resistance","Urea formaldehyde"}, title_fa = {ارزیابی عملکرد چسب اصلاح شده آرد کلزا در ساخت تخته لایه}, abstract_fa = {هدف از این تحقیق، ارزیابی عملکرد چسب اصلاح شده آرد کلزا در ساخت تخته لایه بود. به همین منظور، ابتدا آرد کلزا با هیدروکسید سدیم و اوره/هیدروکسید سدیم به طور جداگانه اصلاح شد. سپس به منظور ایجاد اتصالات عرضی بین مولکول‌های پروتئین، درصدهای مختلفی از ایزوسیانات (5، 15 و 30%) بر مبنای وزن خشک آرد کلزا به دوغاب حاصل اضافه گردید. نتایج نشان داد، با افزایش قلیا و اوره به چسب آرد کلزا، مقاومت خشک برشی آزمونه‌ها در مقایسه با چسب اصلاح نشده به طور معنی‌‌داری افزایش یافت. افزایش میزان ایزوسیانات در چسب‌ها نیز سبب بهبود بیش‌تر این ویژگی شد. در این تحقیق، مقاومت خشک برشی همه چسب‌های اصلاح شده بیش از حد استاندارد 2-314 EN-بود. هم‌چنین، اصلاح شیمیایی چسب‌ها سبب بهبود مقاومت به آب آن‌ها نیز شد، به نحوی که برخی از آن‌ها در توالی‌های غوطه‌وری/خشک کردن رفتاری مشابه یا نزدیک به چسب اوره فرمالدهید از خود نشان دادند.}, keywords_fa = {"چسب آرد کلزا","مقاومت برشی","مقاومت به آب","اوره فرمالدهید"}, url = {https://www.ijwp.ir/article_26713.html}, eprint = {https://www.ijwp.ir/article_26713_623f21c1c7a1ce920fc378885a75e026.pdf} } @article { author = {mastouri, akbar and azadfallah, mohammad and tarmian, asghar and efhami sisi, davood}, title = {The effect of Cerium Dioxide Nanoparticles on the Physical Properties of Polyurethane Clear Coating}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {645-656}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study the effect of nanoparticles of Cerium dioxide (CeO2) and The combined effects bundled with nano-silica in Order to improve the physical properties of polyurethane clear coatings on Thermally modified wood of spruce (Picea abies) substrate were examined. For this purpose, different formulations of polyurethane coatings containing different amounts of the nanoparticles were applied on the heat treated wood surface after preparation. The presence of nanoparticles in polyurethane nanocomposite coating structure was confirmed by EDS analyses. To examine the effects of nanoparticles, adhesion, surface roughness and hardness of polyurethane coatings were assessed. The results showed that the use of cerium dioxide caused to improve the performance of polyurethane coatings on heat treated wood by reducing roughness and increasing adhesion strength of coating layer. In addition, the hardness of polyurethane coating layer enhanceded in the presence of cerium dioxide. Silica nanoparticle in the polymer matrix linked to cerium dioxide gave rise to enhance the adhesion strength and roughness of nanocomposite coatings.}, keywords = {nanoparticles,Polyurethane coating,Adhesion,Hardness,Roughness}, title_fa = {بررسی تاثیر نانوذرات دی اکسید سریم بر خواص فیزیکی پوشش شفاف پلی‌یورتانی}, abstract_fa = {در این مطالعه تاثیر نانوذرات دی‌اکسید سریم(CeO2) و اثرات ترکیبی آن به همراه نانو سیلیکا جهت بهبود خواص فیزیکی پوشش شفاف پلی‌یورتان بر روی چوب اصلاح حرارتی شده گونه نوئل(Picea abies) مورد بررسی قرار گرفت. برای این منظور فرمولاسیونی از پوشش‌های پلی‌یورتانی حاوی مقادیر مختلف از نانوذرات پس از آماده سازی بر روی سطح چوب اصلاح حرارتی اعمال شدند. حضور نانوذرات در ساختار پوشش نانوکامپوزیتی پلی‌یورتانی با طیف‌بینی پراش انرژی پرتو ایکس(EDS)تایید شد. سپس جهت بررسی اثرات نانوذرات بر پوشش، خواص چسبندگی، زبری سطح و سختی مورد ارزیابی قرار گرفتند. نتایج نشان داد که استفاده از دی‌اکسید سریم با کاهش زبری و افزایش مقاومت به چسبندگی، خواص سطحی پوشش پلی‌یورتان بر روی چوب اصلاح حرارتی شده را بهبود داد. علاوه بر آن سختی پوشش پلی‌یورتان در حضور دی‌اکسید سریم افزایش یافت. همچنین نانو سیلیس همراه با دی‌اکسید سریم در زمینه پلیمری، چسبندگی و زبری پوشش‌های نانو کامپوزیتی را تقویت کرد..}, keywords_fa = {نانوذرات,پوشش پلی‌یورتانی,چسبندگی,سختی,زبری سطح}, url = {https://www.ijwp.ir/article_26781.html}, eprint = {https://www.ijwp.ir/article_26781_ac0f98556f768d7dd6a9bebbcaa11c65.pdf} } @article { author = {}, title = {Cover page}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {-}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {}, keywords = {}, title_fa = {شناسنامه علمی شماره}, abstract_fa = {}, keywords_fa = {}, url = {https://www.ijwp.ir/article_31806.html}, eprint = {https://www.ijwp.ir/article_31806_5c63515dd22d44663b31979b62351fbb.pdf} }