در این تحقیق کیفیت ظاهری و مقاومت به تخریب چندسازه های سبز تشکیل یافته از پلی لاکتیک اسید (PLA) و خمیرهای مونواتانول آمین، سولفیت قلیایی-آنتراکینون، سودا رنگبری شده، سودا رنگبری نشده باگاس و الیاف باگاس خام مورد مطالعه و بررسی قرار گرفتند. به منظور مطالعه رفتار زیست تخریب پذیری، تاثیر قارچ پوسیدگی سفید رنگین کمان (Coriolus versicolor) بر PLA خالص و نیز چندسازه های تلفیقی آن با الیاف طبیعی در طی دوره های 30 و 60 روزه بررسی گردید. نتایج نشان داد زمانی که الیاف باگاس با ماتریس پلیمر مخلوط می شود، درصد افت وزنی و سختی نمونه ها افزایش می یابد. همچنین، میزان کاهش اشاره شده در چندسازههای الیاف خمیرکاغذ باگاس بالاتر از چندسازه های حاوی الیاف باگاس خام قرار گرفت. این روند می تواند به وسیله حذف ترکیبات غیرسلولزی مانند لیگنین و همی سلولزها از الیاف در نتیجه فرآیند خمیرسازی توضیح داده شود. همچنین دریافته شد که چندسازه های ساخته شده نسبت به PLA خالص کیفیت سطوح پایین تری دارند که بسته به نوع الیاف، کاهش کیفیت سطوح متفاوت است. با این وجود، درجه تغییر رنگ در چندسازه های دارای الیاف خمیرکاغذ باگاس در مقایسه با چندسازه های دارای الیاف باگاس خام کمتر است. در نهایت الیاف خمیرکاغذ باگاس در مقایسه با الیاف باگاس خام قابلیت تقویت کنندگی بهتری داشتند.
In this research, appearance quality and decay resistance of polylactic acid (PLA) based green composites made from monoethanolamine (MEA) bagasse pulp, alkaline sulfite-anthraquinone (AS) bagasse pulp, bleached soda (B S) bagasse pulp, unbleached soda (UN S) bagasse pulp (UN S) bagasse pulp and raw bagasse fibers (B) were investigated. For the investigation of biodegradation behaviors, effect of the white rot fungi (Coriolus versicolor) on the neat PLA and composites with natural fibers during 30 and 60 days were studied. It is found that when the bagasse fibers were incorporated into composites matrix, percentage weight reduction and stiffness of samples have been increased. Also, the rate of loss mentioned of the composites made from bagasse pulp fibers were superior to the relevant raw bagase fibers. This can be explained by the removal of non-cellulosic components such as lignin and hemicelluloses from the fibers by pulping process. Also, the results indicates the inferior of surface qualities of fabricated composites regarding to neat PLA. Depending on the fiber type, different reductions of the surface qualities were attained. However, the degree of color change of the composites with any type of bagasse pulp fibers were lower compared with composite with raw bagasse fiber. Finally, as compared with the raw bagasse fibers, bagasse pulp fibers have better reinforcing capability.