این پژوهش با هدف بررسی امکان استفاده از الیاف ضایعات پارچه و اثر مقدار ذرات نانورس بر خصوصیات فیزیکی و مکانیکی کامپوزیت حاصل از آرد چوب و پلیپروپیلن انجام شد. بدین منظور، آرد چوب و پلیپروپیلن با نسبتهای وزنی 50 به 50 بههمراه الیاف ضایعات پارچه در دو سطح (0 و 15 درصد)، نانورس در سه سطح (0، 2 و 4 درصد) و سازگار کننده بهمیزان 3 درصد، توسط دستگاه اکسترودر در دمای 160 درجه سانتیگراد مخلوط گردید. سپس نمونههای آزمونی استاندارد با استفاده از روش قالبگیری تزریقی ساخته شدند. خواص مکانیکی نظیر مقاومتهای کششی و خمشی و مقاومت به ضربه فاقدار و خواص فیزیکی شامل جذب آب و واکشیدگی ضخامت، اندازهگیری شد. بهطور کلی نتایج نشان داد، افزودن الیاف ضایعات پارچه بهطور معنیداری سبب بهبود خواص مکانیکی و تضعیف خواص فیزیکی در کامپوزیت چوبپلاستیک شد. همچنین نتایج حاکی از آن بود که خواص فیزیکی و مکانیکی کامپوزیت چوبپلاستیک بهاستثنای مقاومت به ضربه فاقدار، با افزایش مقدار نانورس بهبود یافته است. نتایج مطالعات ریختشناسی کامپوزیت نیز بهمنظور بررسی نحوه پراکنش ذرات نانورس با استفاده از طیف پراش اشعه ایکس (XRD) نشان داد که توزیع ذرات در زمینه پلیمری از نوع بینلایهای بوده، و با افزایش مقدار ذرات نانورس فاصله بین لایهها افزایش یافته است.
This study was conducted to investigate the feasibility of using waste textile fibers and the effect of nanoclay content on the physical and mechanical properties of a composite made from wood flour and polypropylene. Therefore, wood flour and polypropylene with a weight ratio of 50 to 50 with the textile waste fibers in two levels (0 and 15%), nanoclay in three levels (0, 2 and 4%) and 3% compatibilizer were mixed in an extruder at temperature of 160°C. Afterwards, the specimens were made with injection molding thechnology. Mechanical properties including tensile and flexural strength, impact strength and physical properties such as water absorption and thickness swelling were measured. The overall results showed that addition of textile fibers significantly improves the mechanical and and weakens the physical properties of the studied composite. The results indicated that the physical and mechanical properties of wood plastic composites except impact resistance, improved with increasing nanoclay content. The results of morphological studies to study the distribution of nanoclay using a range of X-ray diffraction (XRD) showed that the distribution of particles in the polymer matrix is the type of intercalation and by increasing the amount of nanoclay particles, layer to layer distance was increased.