[1] Doosthoseini, K., 2008. Wood Composite Materials, Manufacturing, Applications, Vol 1, Tehran University Press. Iran. 647 pp.
[2] Veigel, S., Müller, U., Keekes, J., Oberstriebnig, M. and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227-1237.
[3] Lie, H., Pizzi, G. and Celzard, A., 2008. Influence of nanoclay on urea-formaldehyde resins for wood Adhesives and its model. Journal of applied polymer science, 109:2442–2451.
[4] Qiaojia, L., Guidi, Y., Jinghong, L. and Jiuping, R., 2006. Property of nano-SiO2 / urea formaldehyde resin. Journal of Fujian Agriculture and Forestry, 2: 230-237.
[5] Model, O. and Sefidrouh, M., 2015. Improving adhesive characteristics with Nano-Reinforcement: A review. Journal of Polymerization, 5 (4): 43-53.
[6] Xu, Sh., Girouard, N., Schueneman, G., Shofner, M.L. and Meredith, J.C., 2013. Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals. Polymer Journal, 54 (24) 6589- 6598.
[7] Lopez-Suevos, F., Eyholzer, C., Bordeanu, N.and Richter, K., 2010. DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils. Cellulose, 17 (2) 387-398.
[8] Barzali, S., Jamalirad, L., Faraji, F. and Hedjazi, S., 2015. Using cellulose nanofiber as filler and reinforcing agent of urea formaldehyde. Iranian Journal of Wood and Paper Industries. 6 (2): 227-237. (In Persian).
[9] Zike, S.and Kalnins, K., 2011. Enhanced Impact Absorption Properties of Plywood. In Civil Engineering. International Scientific Conference. Proceedings (Latvia). Latvia University of Agriculture.
[10] Jandial, R., Reichwage, B., Levy, M., Duenas, V. and Sturdivan, L., 2008. Ballistics for the neurosurgeon. Neurosurgery, 62: 472-480.
[11] Dashti, H., Salehpur, Sh., Taghiyari, H.R., Akbarifar, F. and Heshmati, S., 2012. The effect of nano clay on the mass transfer properties of plywood. Digest journal of nanomaterial and biostructures, 7(3):853–860.
[12] Dong, H.K. and Arthur, J., 2004. Enhanced composite board curing and performance via nano clays (Conference). Paper summit Spring Technical and International Environmental Conference. Atlanta, GA, United States, 5: 387-391.
[13] Hong, L., Guanben, D., Pizzi, A.and Celzard, A., 2008. Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model. Journal of Applied Polymer Science, 109(4): 2442-245.
[14] Jinshu, S., Jianzhang, L., Wenrui, Z. and Derong, Z., 2007. Improvement of wood properties by urea Formaldehyde resin and nano-SiO2. Frontiers of Forestry, 2(1): 104-109.
[15] Ziaei-tabari, H., Khademieslam. H., Bazyar, B.and Hemmasi, A.H., 2016. Investigation on the possibility of making a nano composite containing pebax and nanocellulose. Iranian Journal of Wood and Paper Science Research. 31(1): 92-104. (In Persian).