[1] Li, K., Geng, X., Simonsen, J. and Karchesy, J., 2004. Novel wood adhesives from condensed tannins and polyethylenimine. International Journal of Adhesion and Adhesives, 24(4): 327-333.
[2] Kim, S., 2009. Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission. Bioresource Technology, 100(2): 744-748.
[3] Umemura, K., Inoue, A. and Kawai, S., 2003. Development of new natural polymer-based wood adhesives I: dry bond strength and water resistanse of kongacglucomanan chitosan and their composites. Journal of Wood Science, 49: 221-226.
[4] Nazarnejad, N., 2011. The manufacture of particleboard with unusual connections. Journal of Wood and Paper Science Research, 26 (1): 1-9.(In Persian).
[5] Hoong, Y.B., Paridah, M.T., Luqman, C.A., Koh, M.P. and Loh, Y.F., 2009. Fortification of sulfited tannin from the bark of Acacia mangium with phenol–formaldehyde for use as plywood adhesive. Industrial Crops and Products, 30(3) : 416–421.
[6] Nemli, G., Kırcı, H. and Temiz, A., 2004. Influence of impregnating wood particles with mimosa bark extract on some properties of particleboard. Industrial Crops and Products, 20(3): 339–344.
[7] Zivkovic, J., Mujic, I., Zekovic, Z., Nikolic, G., Vidovic, S. and Mujic, A., 2009. Extraction and analysis of condenced tannis in castanea sativa mill. Journal of Central Europeon Agriculture, 10(3): 283-288.
[8] Asghari, J. and Mazaheri Tehrani, M., 2009. Tannin extracted from the leaves of eucalyptus and Trymystryn of nutmeg Hindi using microwave radiation. Journal of Medicinal and Aromatic Plants investigations. 26(2): 185-190.(In Persian).
[9] Dost Hosseini, k., 2007. Production Technology and Application, sheets of compressed wood, Tehran University Press, Page 714.(In Persian).
[10] Lei-feng, Z., Yu, L., Zheng-dong, X., Ya-zhuo, Z. and Fang, Z., 2011. State of research and trends in development of wood adhesive. Forestry studies china, 13(4): 321-326.
[11] Grigoriou, A.H., 1997. Bark extractive from pinus halepensis mill fortified with polymeric diisocyanate for exterior grade particleboard. J. HolzalsRoh- und werkstoff, 55(4): 269-274.
[12] Osman, Z., 2011. Thermomechanical analysis of the tannins of Acacia Nilotica spp. Nilotica as a rapid tool for the evealuaion of wood-based adhesives. Journal of Thermal Analysis and Calorimetry, 107(2): 945-949.
[13] Ballerini, A., Despres, A. and Pizzi, A., 2005. Non-toxic, zeromission tannin glyoxal adhesives wood panels. Holz Als Roh-Und Werstoff, 63(6): 477-478.
[14] Bisanada, E.N.T., Ogola, W.O. and Tesha, J.V., 2003. Characterisation of tannin resin blend for particle board applications. Cement and concrete composites, 25(6): 593-598.
[15] Ndazi, B., Tesha, J.V., Karlsson, S. and Bisanda, E.T.N., 2006. Production of rice husks composites with Acacia mimosa tannin - based resin. Journal of Materials Science, 41(21): 6978 – 6983.
[16] Sedano-Mendoza, M. Navarrete, P. and Pizzi, A., 2010. Effect of layers relative moisture content on the IB strength of pine tannin bonded particleboard. Eur. J. Wood Prod, 68: 355–357.
[17] Pizzi, A., Stracke, P. and Trosa, A., 1997. Industrial tannin/hexamine low-emission exterior particle board. Holz Als Roh-Und Werstoff, 60: 65-72.
[18] Pizzi, A., Valenezuela, J. and Westemeyer, C., 1986. Low formaldeyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard. Holz Als Roh-Und Werstoff, 52: 311-315.
[19] European Standard, Particleboards-Specifications-Part 3: Requirementsfor Boards for Interior Fitments (Including Furniture) for Use in Dry Conditions. European Standardization Committee, EN 312-3. 2010.
[20] European Standard, Particleboards-Specifications-Part 2: Requirementsfor General-Purpose Boards for Use in Dry Conditions. European Standardization Committee, Brussell, EN 312-2. 2010.
[21] European Standard, Particleboards and fiberboards of swelling in thickness after immersion. Europen standardization Committee, Brussell, EN 317. 2008.
[22] European Standard, Wood based panels, determination of tensile strength perpendicular to panel of of board. European Standardization Committee, Brussell, EN 319. 2008.
)