[1] Saffarzadeh, S. and Ebrahimi, Gh., 2000. A Study of cellulosic fiberes /High Density Polyethylene Composites and their Mechanical Properties. Iranian Journal of Natural Resources, 53(3): 217-226. (In Persian).
[2] Karimi, A.N., Roohani, M., Parsapazouh. D. and Ebrahimi, GH., 2004. A Study of the Feasibility of the Use of Lignocelluosic, Bagasse and Kenaf Fibers in the Manufacture of Fiber-Polypropylene Composites. Iranian Journal of Natural Resources, 57(3): 379-390. (In Persian).
[3] Tajvidi, M. and Ebrahimi, GH., 1998. Study of the Feasibility of the Use of Cellulose, Paper and Wood Fibers in the Manufacture of Fiber-Polypropylene Composites. Iranian Journal of Natural Resources. 51(2): 35-45. (In Persian).
[4] Rahimi, H., 2000. Introduction of Composites. In: Proceedings of the 2nd short time specialist and learning course reinforced plastics. Iran Polymer and Petrochemical Institute, Nov. 12 Tehran, Iran. p 129-134. (In Persian).
[5] Kim, J. K. and Pal, K.., 2010. Recent Advances in the Processing of Wood-Plastic Composites, Spriger- Verlag, Berlin Heidelberg, Germany, 323 p.
[6] Ashori, A., 2008. Wood-Plastic composites as promising green-composites for automotive industries!. Bioresource Technology. 99(11): 4661-4667.
[7] Yeh, S.K., Agarwal, S. and Gupta, R.K.., 2006. Process Development for ABS-Based Wood-Plastic Composites. Progress in Wood and Bio-Fiber Plastic Composites. International Conference, May. 1 – 2 Toronto, Ontario, Canada, p 355-364.
[8] Soundrarajan, S., Palanivelu, K. and Sharma, S.K.., 2012. Studies on twin screw compounding and mechanical, thermal & electrical properties of wood flour filled ABS. International Journal of Engineering Research and Technology, 7(1): 1-10.
[9] Croucher, M., Linnell, J., Gupta, R., Facemyer, K., GangaRao, H., Ritchie, D., Cairns, D., Tucker. J., Wang, J. and Shi, X., 2010. Final Report For the Project Entitled: Continuation of Research, Commercialization, and Workforce Development in the Polymer/Electronics Recycling Industry, West Virginia University Research Corporation. 206 P.
[10] Yeh, S.K., Agarwal, S. and Gupta, R.K.., 2009. Wood–plastic composites formulated with virgin and recycled ABS. Composite Science and Technology, 69(13): 2225-2230.
[11] Espert, A., Vilaplana, F. and Karlsson S., 2004. Comparison of water absorption in natural cellulosic fibers from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Composites: Part A,Applied Science and Manufacturing, 35(11): 1267–1276.
[12] Shi, S. Q. and Gardner, D. J., 2005. Hygroscopic thickness swelling rate of compression mold wood fiberboard and wood fiber/polymer composite. Composites Part A, Applied Science and Manufacturing, 37(9): 1276-1285.
[13] Stark, N., 2001. Influence of Moisture Absorption on Mechanical Properties of Wood Flour-polypropylene Composites. Journal of Thermoplastic Composite Materials, 14(5): 421–432.
[14] Mishra, S., Naik, J.B. and Patil, Y.P., 2004. Studies on swelling properties of wood polymer composites based on agrowaste and novolac. Journal of Advances in Polymer Technology, 23(1): 46-50.
[15] Yeh, S.K., Agarwal, S. and Gupta, R. K.., 2007. Recycling ABS from End-of-Life Electronics into Wood-Plastic Composites. Global Plastics Environmental Conference, Society of Plastics Engineers: March. 4-7 Orlando, Florida, USA, p 1315-1319.
[16] Kaymakci, A., Ayrilmis, N. and Gulec, T., 2013. Surface Properties and Hardness of Polypropylene Composites Filled With Sunflower Stalk Flour. BioResources, 8(1): 592-602.
)