بررسی ظرفیت لنگر خمشی اتصال‌های ساخته‌شده با پین در مبلمان صفحه‌ای

نوع مقاله : مقاله پژوهشی

نویسندگان

1 دانشجوی دکتری، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج، ایران

2 استاد، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج، ایران

3 استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج، ایران

4 استادیار دانشگاه مین، امریکا

چکیده

این پژوهش با هدف بررسی ظرفیت لنگر خمشی اتصال با پین چوبی در تخته‌چندلا صورت گرفته است. اعضای اتصال از تخته‌چندلا با ضخامت 19 میلی‌متر و ساخته‌شده از گونه‌های پهن‌برگ (راش، ممرز و توسکا) بودند. در این  بررسی، تأثیر متغیرهای گونه چوب پین (راش و ممرز)، قطر پین در سه سطح 6، 8 و 10 میلی‌متر و عمق نفوذ در سه سطح 9، 13 و 17 میلی‌متر، بر ظرفیت لنگر خمشی اتصال‌های T شکل بررسی‌شده است. نتایج نشان دادند که ظرفیت لنگر خمشی اتصال با افزایش قطر و عمق نفوذ پین افزایش می‌یابد. ظرفیت لنگر خمشی اتصال‌های ساخته‌شده با پین راش در مقایسه با اتصال‌های ساخته‌شده با پین ممرز بیشتر است. بالاترین میزان ظرفیت لنگر خمشی‌ ( N.m29/44) مربوط به پین راش با قطر 10 میلی‌متر و عمق نفوذ 17 میلی‌متر بوده است. کمترین میزان ظرفیت لنگر خمشی (N.m08/12) در پین ممرز با قطر 6 میلی‌متر و عمق نفوذ 9 میلی‌متر دیده‌شده است.

کلیدواژه‌ها


[1]        Ebrahimi, G. 2007. Engineering design of furniture structure. Tehran university publication, 491 pp. (In Persian).
[2]        Jones, A. and Lutes, R. 1993. Handbook of joinery. New York, USA: Sterling Press, 144 p.
[3]        Eckelman, C. A. 2003. Textbook of product engineering and strength design of furniture. West Lafayette (IN): Purdue University Press.
[4]        Tankut, A. N. and Tankut, N. 2009. Investigations the effects of fastener, glue, and composite material types on the strength of corner joints in case–type furniture construction. Material Design, 30:4175–82.
[5]        Said, A. Ashaari, H. Roslan, A. Hilmi, M. (1993). Withdrawal and bending strength of dowel from three Malasian timbers. Journal of tropical forest science,  6(1): 74-80.
[6]        Chou, C. and Hes, C. (1998). Effect of hygroscopic treatments on bending strength of dowel joints. Adhesive technology and bonded tropical wood products, 96: 602-605.
[7]        Norvydas, V. Juodeikiene, I. Minelga, D. 2005. The Influence of Glued Dowel Joints Construction on the Bending Moment Resistance. Materials science,  11(1): 36-39.
[8]        Zhang, J. and Eckelman, C.A. (1993). Rational design of multi- dowel corner joints in case construction. Forest produsts Journal, 43(11): 52-58.
[9]        Tankut, A.N. 2005. Optimum dowel spacing for corner joints in 32 mm cabinet construction. Forest Produsts Journal,  55(12):100–4.
[10]    Uysal, B. and Ozcifci, A. 2003. Effects of dowels produced from various materials on withdrawal strength in mdf and pb. Journal of Applied Polymer Science, 88: 531–535.
[11]    Tas, H. H. 2010. Strength properties of L–profiled furniture joints constructed with laminated wooden panels. Scientific Research and Essays, 5 (6): 545–50.
[12]    Ghofrani, M. and Noori, H. 2005. Lateral holding strength of wooden dowel, screw and ready-to-assemble joints (RTA joints) constructed of Medium Density Fiberboard (MDF). Journal of Forest and Wood Products, 24(2): 219-231. (In Persian).
[13]    Bahmani, M., Ebrahimi, G., Fathi, L. 2009. Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF) By mathematic model.  Iranian Journal of Wood and Paper Science Research, 24(1): 117-124. (In Persian).
[14]    Bahmani, M., Ebrahimi, GH., Veisi, J. 2009. Design of experimental model for predicting ultimate bending strength dowel joint in medium density fiber. Journal of forest and wood products (JFWP), 62(4): 335-342. (In Persian).
[15]    Standard Test Methods for Small Clear Specimens of Timber. Annual Book of ASTM Standard, D 143. 2000.
[16]    Standard Test Methods for Specific Gravity of Wood and Wood–Base Materials, Annual Book of ASTM Standard, D 2395, 1999.
[17]    Eckelman, C. A. 2004. Engineering Design of furniture. Purdue Uni.UsA, Chap 6.
[18]    Zhang, J. L. and Eckelman, C. A. 1993. The bending moment resistance of single–dowel corner joints in case construction. Forest Produsts Journal,  43(6):19–24.